Transfer Matrix Method Applied in the Study of Vibrations of the Centrifuges with the Basket in the Console
Journal Title: Romanian Journal of Acoustics and Vibration - Year 2012, Vol 9, Issue 1
Abstract
This paper approaches a field of advanced research: the study of vibrations of industrial centrifuges by applying the transfer matrix method. It will be established a study model considering the shaft as continuous medium. The transfer matrix and the transition matrices will be established. The case of the free vibrations will be developed. The results will be compared with them obtained using the study model for centrifuges, as discrete system with two degrees of freedom. The paper proposes new approaches in the subject field.
Authors and Affiliations
Mihail BOIANGIU, Adina BOIANGIU
Keywords
Related Articles
- EP ID EP98983
- DOI -
- Views 83
- Downloads 0
The Use of the Friction Pendulum Bearings for Isolation of the Built Environment
Base isolation systems have become a significant element of a structural system to enhance reliability during an earthquake. One type of base isolation system is Friction Pendulum Bearings in which the superstructure is...
The Linear Viscoelastic Behavior of the Asphalt Mixture to the Haversine Impulsive Dynamic Actions Specific in Road Traffic
In this work is analyzed the behavior of the asphalt mixture under the action of dynamic traffic, and the contact between wheel and track is modeled as a dynamic excitation function of haversine type.
A Car Component Subjected to Multiple Sources of Random Vibrations
In this article, the random vibration simulation method applied to a car component is presented. The main vibration sources which appear at the automotive body level are mentioned. By using finite element analysis, one c...
Noise Attenuation Due to Vegetation
It is well-known that noise decreasing techniques are based on two types of methods: one active and another passive. The latter often employs the vegetation which is planted forming green protection zones areas. In this...
Test Bench for Semi-Active Magnetorheological Fluid Damper Using a Modified Charpy Pendulum
The paper presents an experimental stand for testing a semi-active damper with magnetorheological fluid (MRF.) For reduce costs and time of execution, the solution has been found is to alter a Charpy pendulum. Are detail...