Transient Thermal Analysis for Heat Dissipation from Engine Cylinder Block with Different Shaped Holes in Fins using CFD

Abstract

The cost of fuel and materials in all sectors is rising day by day. In the IC engine, the engine fails primarily because the heat transfer from the cylinder wall to the ambient air is inadequate. Heat is derived from the cylinder wall in the engine by means of convection heat transfer through the fins. In this study, a 3 dimensional numerical 3 D transient thermal state simulation was used to investigate the heat dissipation of the engine cylinder fin with holes of different shapes hexagonal and an elliptical . ANSYS 17.0 simulation software was used to research the physiognomy of the heat transfer physiognomies of an engine cylinder fin with and without hole. The results indicate that, the fin with an elliptic hole attain a temperature of 797.94 °C at 14 seconds in comparison to other where with hexagonal hole 798.02 °C, and without hole 798.14°C. So above values clearly shows that fin with an elliptic hole dissipates more heat as compare to fin with hexagonal hole or without hole. Fin with an elliptic hole have a total heat flux of 56122 W m² comparison to other where with hexagonal hole 49967 W m², and without hole 46704 W m². From the above results it is clearly shows that, the new proposed shape fin or fin configuration will greatly improve the heat transfer rate and increase the fin efficiency. Optimum results are obtained when we provide an elliptic hole in an engine cylinder fin Sunil Kumar Bharti | Prof. Rohit Soni "Transient Thermal Analysis for Heat Dissipation from Engine Cylinder Block with Different Shaped Holes in Fins using CFD" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-6 , October 2020, URL: https://www.ijtsrd.com/papers/ijtsrd35736.pdf Paper Url: https://www.ijtsrd.com/engineering/mechanical-engineering/35736/transient-thermal-analysis-for-heat-dissipation-from-engine-cylinder-block-with-different-shaped-holes-in-fins-using-cfd/sunil-kumar-bharti

Authors and Affiliations

Sunil Kumar Bharti

Keywords

Related Articles

Ovicidal and Larvicidal Effects of Crude Ethanolic Extracts of Acanthus Montanus Acanthaceae on Heligmosomoides Bakeri Nematoda, Heligmosomatidae

Objective An in vitro study was carried out to determine the ovicidal and larvicidal activity of crude ethanolic extracts of Acanthus montanus Acanthaceae leaves on the eggs and the third larval L3 stage of Heligmosomoid...

A Bacteriological Study of Localized Skin Infection in Human Beings

Present paper represents the bacteriological study of localized skin infection in human. Pathogenic bacteria are causes the various disease including skin disease. Sample was collected from the infected person and pourin...

Ethical Issues in Research Writing

This paper is based on the ethics of research writing. Plagiarism means stealing of ideas or thoughts or concepts of other person as your own without quoting or citing or referencing them. Representing other person thoug...

Optimization of FLC Using PSO – FF Hybrid Algorithm Using DSTATCOM for Power Quality Improvement

Electrical power is the most established form of power and the people is greatly dependant on the electric power supply. A life cannot be imagined with no supply of electricity. Most of the industrial and domestic loads...

Solar Irradiation Prediction using back Propagation and Artificial Neural Network

Solar Energy is one of most promising potential renewable sources of energy. But among all the conventional sources of renewable energy, its nature is quite unpredictable owing to the fact that the solar irradiation keep...

Download PDF file
  • EP ID EP690832
  • DOI -
  • Views 116
  • Downloads 0

How To Cite

Sunil Kumar Bharti (2020). Transient Thermal Analysis for Heat Dissipation from Engine Cylinder Block with Different Shaped Holes in Fins using CFD. International Journal of Trend in Scientific Research and Development, 4(6), -. https://europub.co.uk./articles/-A-690832