Treatment of Wastewater Resulting from the Metallic Coatings Process
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2016, Vol 39, Issue 2
Abstract
The technological cleaning processes of steel strip surfaces used in metal coatings require organic or inorganic chemicals with a high risk of toxicity. To avoid pollution, the water resulting from these processes must be neutralized. During the degreasing process, alkaline solutions containing caustic soda (NaOH), tri-sodium phosphate (Na3PO4) and detergents are used and the pickling process is made in 15-20% HCl solution. Rinse waters resulting from these operations will have an alkaline pH respectively acid pH, with values depending on the duration of use or refresh solution. Neutralization was done with sulfuric acid solutions for alkaline water and sodium hydroxide solutions for acid water. The research aimed to establish the optimal conditions for neutralization and the optimal reagent consumptions.
Authors and Affiliations
Tamara RADU
Keywords
Related Articles
- EP ID EP577182
- DOI -
- Views 75
- Downloads 0
Corrosion Behavior of Some Materials in 0.5M Ammonium Hydroxide Solution
The present work has the purpose of studying metallographic aspects and corrosion resistance of three materials used in ammonia stripping plants. The corrosion process was evaluated by gravimetric tests and potentiodynam...
The Analysis of a Workplace From an Ergonomically Criterion. Case Study: Preliminary Charge
This paper presents a practical method of analyzing a wokplace from an ergonomically criterion based on an "ergonomic analysis questionnaire", and, also, the conclusions and proposed measures in order to improve the acti...
Electric and Electromagnetic Properties of Fiber Fabric Based Filled Epoxy Composites
Electric and magnetic properties of laminate carbon fiber fabric based epoxy composites are investigated through experimental techniques. Various concentrations of powder fillers were used in order to change the basic pr...
Mercury Determination from Incidentally Polluted Waters by Collecting Gravimetry in Organic Stage Method
Determination of mercury in incidentally polluted waters, presented in CALIST Program, was carried out using tiobis-β-naphthol as a reagent. The method proposed for mercury determination, named “collecting gravimetry in...
Some Aspects about the Refractory Lining Wear in Furnaces
For melting cast iron, carbon steel, copper and copper alloys the quartzite is still one of the most used lining material and the most cost effective as well. The silica lining has to be replaced frequently due to the we...