TRIBOLOGICAL CHARACTERISTICS OF LUBRICATING OIL USED IN MARINE DIESEL ENGINE
Journal Title: Tribologia - Year 2014, Vol 255, Issue 3
Abstract
The paper presents tribological characteristics of Titan Truck Plus 15W40 lubricating oil used in trunk piston marine diesel engine Caterpillar 3512B. The test results were collected by means of a four-ball extreme pressure tester T-02 according to PN-76/C-04147. The manufacturer of Caterpillar 3512B engine recommends lubricating oil change after every 1000 hours of operation. Figures 2 to 5 present the moment of friction and temperature courses for an increasing load of the friction nodes lubricated by different oil samples. Lubricating oil samples were taken from an engine oil system in recommended operating period. Based on obtained characteristics, seizure points Pt were determined. It was found that seizure point is not an authoritative index to asses lubricating oil. The essential is the change of friction moment in whole load range that makes it possible to determine the boundary layer destruction and its regeneration process in time.
Authors and Affiliations
Andrzej MŁYNARCZAK
Keywords
Related Articles
- EP ID EP263449
- DOI -
- Views 59
- Downloads 0
THE EFFECT OF SiO2 AND TiO2 THIN COATINGS OBTAINED BY THE SOL-GEL METHOD ON METAL–POLYMER SLIDING COUPLES
Tribological tests were carried out for single- and triple-layered SiO2 and TiO2 thin coatings obtained on metallic substrates by the sol-gel method using the dip-coating technique. Previous studies (Raman spectroscopy,...
ZUŻYWANIE W MIKROSKALI SKOJARZENIA ŻELIWNY PIERŚCIEŃ TŁOKOWY –KOMPOZYTOWA TULEJA CYLINDROWA
W pracy przedstawiono próbę wyjaśnienia mechanizmów zużywania skojarzenia żeliwny pierścień tłokowy/kompozytowa tuleja cylindrowa w mikroskali, używając płytkowego modelu perlitu. Do obliczeń lokalnych wartości naprężeń...
Opis uszkodzeń warstwy DLC i podłoża Si w badaniach mikrotwardości z rejestracją sygnału EA
METAL MATRIX COMPOSITES CONTAINING A GLASSY CARBON PARTICLES USED TO WORK IN FRICTION CONDITIONS
The results of the physicochemical properties of composite materials containing ceramic particles of carbon of amorphous structure are presented. The influence of the size and reinforcement value on tensile strength, imp...
The relationship between the lubricating properties indicators of gear oils determined by different methods