TRIBOLOGICAL RESISTANCE INCREASE OF CAST IRON CYLINDER BRUSH SURFACE LAYER WITH THE APPLICATION OF LASER ABLATION TREATMENT
Journal Title: Tribologia - Year 2009, Vol 227, Issue 5
Abstract
Results of preliminary laboratory and technology tests of cast iron after laser modification are presented in the paper. In order to improve macro- and micro-geometry of the upper layer of cylinder sliding surface, a laser processing has been used for its modification (hollowing of oil micro-reservoirs in the upper zone of the sleeve using Nd:YAG laser with a special focusing system). A comparison of surface topographies modified using traditional mechanical methods with laser processed ones was made. Preliminary tests included a selection of optimum parameters of laser processing, investigations of surface topography, structural, hardness, and chemical composition in micro-volumes.<br/><br/>
Authors and Affiliations
Wojciech Napadłek
Keywords
Related Articles
- EP ID EP517125
- DOI -
- Views 49
- Downloads 0
PROBABILISTIC STUDIES FOR (SLIDE&ROLLING) BEARING SEIZURE DETERMINATION
Selection, montage, and lubrication are the fundamental conditions, which have an influence on the correct and long-lasting work of bearing without seizure. The temperature of a correctly assembled and lubricated bearing...
OPERATIONAL EVALUATION OF PISTON-RINGS-CYLINDER LINER ASSEMBLY WEAR IN HIGH POWER MARINE DIESEL ENGINES
This paper presents an operational evaluation of piston-piston rings-cylinder liner (PRC) assembly wear in marine diesel engines of high power. It is based on visual inspection through cylinder liner scavenge ports. Clea...
MICRO-IMPACT CRACKING OF TRIBOLOGICAL COATINGS
The stress field in the coating/substrate system causes combined effects on both the coating and substrate materials due to cyclic loads. The consequence is the initiation and propagation of fatigue cracks leading to a l...
Miary interakcji w obrazach AFM obszaru węzła tarcia
Artykuł jest kontynuacją opracowań [L. 1]. Przedstawia fragment wyników analizy relacji właściwości tribologicznych i topografii ponad 5500 grafik z pomiarów AFM. Niniejsze opracowanie jest wprowadzeniem w ilościową ocen...
Obciążenie graniczne powłok wielowarstwowych TiN/CrN w styku tribologicznym kula-tarcza
W artykule przedstawiono wyniki badań strukturalnych,mikromechanicznych i tribologicznych powłok wielowarstwowych typu TiN/CrN. Powłoki o całkowitej grubości 1 m, zbudowane z 2, 8 i 32 na przemian ułożonych warstw TiN i...