Ultrasonic method of quality control for textile materials
Journal Title: Archives of Materials Science and Engineering - Year 2019, Vol 1, Issue 97
Abstract
Purpose: The ultrasonic amplitude method for controlling the surface texture density of textile materials was first studied and used. Design/methodology/approach: For the first time, the surface texture density has been determined. The research was conducted using the ultrasonic method, rather than by mathematical calculations, which made it possible to invent a new approach to contactless quality control of textile materials. In order to identify the functionality of bicomponent textile material, formed from raw materials with opposite hygroscopic properties, two-layer knitted fabrics were chosen to protect the human respiratory organs. As a hydrophilic type of raw material used yarn with composition is as follows – cotton 34%, flax 33%, viscose 33%, and in the function of a hydrophobic raw material, polypropylene multifilament yarn. Using the ultrasonic method, studies of a new type of knitwear were carried out, the values of the surface density of the material were obtained. Products from this composition provide respiratory protection from dust and comfortable work in the area of road repairs up to 8 hours. Findings: The combination of natural and synthetic materials for individual masks allowed them to be used under different operating conditions. The problem of structure and design of materials was resolved through the use of computer technology and computer-aided design of textiles, and the possibility of applying the ultrasonic amplitude method to control the surface density of textile materials was substantiated. During the analysis of the results of experimental studies, it was found necessary to ensure the uniformity of the physical and mechanical properties of textile materials in the production process. Using the ultrasonic method, the thickness gauge was used to determine the surface density of various materials for the manufacture of personal protective equipment for road maintenance workers. Research limitations/implications: The method of measurement has been tested and has no limitations. However, the study was conducted on samples of textile materials that were manufactured in Ukraine and according to patents of authors. Practical implications: Individual masks for the protection of human respiratory organs are recommended for use by road workers and cyclists. Originality/value: The originality of the results of the article is the experimental data of studies on the content of textile materials and the accuracy of measuring their surface density by an ultrasonic contactless device.<br/><br/>
Authors and Affiliations
N. M. Zashchepkina, V. G. Zdorenko, N. R. Tierentyeva, O. M. Markina, M. O. Markin, K. M. Bozhko
Keywords
Related Articles
- EP ID EP600036
- DOI 10.5604/01.3001.0013.2867
- Views 85
- Downloads 0
Comparison of structure and mechanical properties of implants produced by injection method
Purpose: The paper presents the possibility to improve the mechanical properties of dental implants produced of Ti6Al4V titanium alloy and possibility to use a new method to production those implants. The aim of the stud...
Ultrasonic method of quality control for textile materials
Purpose: The ultrasonic amplitude method for controlling the surface texture density of textile materials was first studied and used. Design/methodology/approach: For the first time, the surface texture density has been...
Conventional synthesis and characterization of rare earth doped barium borophosphates, BaBPO5:RE (Y, Gd and La)
Purpose: of this research, our target is synthesis and characterization of rare earth metalssuch as Y, Gd and La doped barium borophosphate compounds which are applicable innon-linear optics industry.Design/methodology/a...
Warm stretch-formability of 0.2%C- 1.5%Si-(1.5-5.0)%Mn TRIP-aided steels
Purpose: Warm stretch-formability of 0.2%C-1.5%Si-(1.5-5.0)%Mn transformation-induced plasticity (TRIP)-aided sheet steels with annealed martensite matrix was investigated for automotive applications. Additio...
Multi-objective optimization of WEDM process parameters of Ti49.4-Ni50.6 shape memory alloy for orthopaedic implant application
Purpose: This paper focuses on the investigation on the effect of process parameters such as pulse on time (Ton), pulse off time (Toff), spark gap set voltage (SV), wire feed (WF) and wire tension (WT) on the responses...