Usage of fuzzy classification of distribution type for small volume samples
Journal Title: Інформаційні системи, механіка та керування - Year 2017, Vol 0, Issue 17
Abstract
volume samples are analyzed. The fuzzy identification method (proposed by Y. M. Klikushyn) which permits identification distributions under condition of small samples was selected for distribution identification. The further research of features and development of fuzzy identification in small volume samples was conducted, the scope of fuzzy identification usage was expended and a research on probability of dispensation differentiation was carried out in the work. The reliability of classifying samples using the generation of reference samples was defined in the work. The research of reliability on one sample showed that the probability of changing linguistic code is quite large. It is recommended to average several samples to increase the likelihood of accurate identification. Number of samples can be determined for a given probability. The research of fuzzy classification included the development of finding fuzzy estimates algorithm for samples of different sizes, finding the necessary and sufficient number of estimates and choice of choice principles of used estimates from the possible range. The correlations for fuzzy estimates based on the specified volume were obtained. Usage of these ratios allowed expanding the scope of fuzzy classification and creating a library of linguistic codes which greatly simplifies its procedure. Recommendations on the samples number required for achieving necessary classification probability were made.
СИСТЕМА МОНІТОРИНГУ, КОНТРОЛЮ ТА КЕРУВАННЯ ДЛЯ 3D-ПРИНТЕРІВ ТИПУ REPRAP З FDM-ТЕХНОЛОГІЄЮ ДРУКУ
The problems of 3D-printing process monitoring, verification and control and the way how to achieve the best results of quality for 3D-printed models by improving the design and software for RepRap 3d-printers with FDM p...
Формування шаблонів фазових портретів кореляційної функції
<span lang="UK">Розглянуто проблему створення шаблонів бази знань для виявлення взаємозв'язків і циклічності складних процесів в умовах неповної і нечіткої апріорної інформації. Розроблено програмне забезпечення для ство...
ДОСЛІДЖЕННЯ ВПЛИВУ V-ПОДІБНОСТІ КРИЛ НА АЕРОДИНАМІЧНІ ХАРАКТЕРИСТИКИ ЛІТАЛЬНОГО АПАРАТА СХЕМИ «ТАНДЕМ»
In aviation the aircraft aerodynamic scheme "tandem" with comparable areas of front and rear wings is known. The aerodynamic "tandem" scheme benefits by lift and cargo capacity with limited wing widths. Due to this it...
The scheduling tasks in real-time systems
As it is known, the main task of the RTS is to react in time to events at the site. Therefore, the establishment of some tasks sequence or mutual exclusion is an urgent problem for the RTS. The RTS of a rigid RT must en...
IDENTIFICATION OF NON-STATIONARY LOADINGS APPLIED TO ELASTICALLY DEFORMED ELEMENT OF CONSTRUCTION
In the manuscript the technique of identification as functions of time of R non-stationary loads acting on a element of construction is presented. It is assumed that deformation of the element is elastic; its geometry, a...