Utilising inkjet printed paraffin wax for cell patterning applications
Journal Title: International Journal of Bioprinting - Year 2016, Vol 2, Issue 1
Abstract
We describe a method to prepare patterned environments for eukaryotic cells by inkjet printing paraffin wax onto a substrate. This technique bypasses the requirement to create a master mould, typically required with the use of polydimethylsiloxane techniques and the printed structure could be immediately used to guide cell proliferation. In a space of 2–3 hours, the desired pattern could be created with computer assisted design, printed and have cells seeded onto the scaffold, which could reduce the cycle time of prototyping micropattern designs. Human dermal fibroblasts and RN22 Schwann cells were seen to proliferate within the fabricated patterns and survive for more than 7 days. Additionally, the wax constructs could be readily removed from the substrate at any stage after cell seeding with the cells continuing to proliferate. Thus, we report on a simple but novel approach for the controlled physical positioning of live cells by wax inkjet printing.
Authors and Affiliations
Christopher Chi Wai Tse, Shea Shin Ng, Jonathan Stringer, Sheila MacNeil
Keywords
Related Articles
- EP ID EP678640
- DOI -
- Views 181
- Downloads 0
Bioprinting with pre-cultured cellular constructs towards tissue engineering of hierarchical tissues
The fabrication of physiologically active tissue constructs from various tissue elements are vital for establishing integrated bioprinting and transfer printing techniques as vital tools for biomedical research. Physiolo...
Pilot Study of the Biological Properties and Vascularization of 3D Printed Bilayer Skin Grafts
The skin is the largest human organ, and defects in the skin with a diameter greater than 4 cm do not heal without treatment. Allogeneic skin transplantation has been used to allow wound healing, but many grafts do not s...
3D bioprinting technology for regenerative medicine application
Alternative strategies that overcome existing organ transplantation methods are of increasing importance because of ongoing demands and lack of adequate organ donors. Recent improvements in tissue engineering techniques...
Mechanism for corrosion protection of β-TCP reinforced ZK60 via laser rapid solidification
It remains the primary issue to enhance the corrosion resistance of Mg alloys for their clinical applications. In this study, β-tricalcium phosphate (β-TCP) was composited with Mg-6Zn-1Zr (ZK60) using laser rapid solidif...
In vitro pre-vascularization strategies for tissue engineered constructs–Bioprinting and others
Tissue-engineered products commercially available today have been limited to thin avascular tissue such as skin and cartilage. The fabrication of thicker, more complex tissue still eludes scientists today. One reason for...