UTILIZATION OF CHESTNUT SHELL WASTES AS A DYEING AGENT FOR LEATHER INDUSTRY
Journal Title: Revista de Pielărie Încălţăminte - Year 2016, Vol 16, Issue 4
Abstract
In this study, extraction of dyestuff from chestnut shell wastes and dyeing properties were investigated. Firstly, feed/solvent (F/S): 1/10-1/20 (g/ml), time: 1-2 h, solvent: water, water+NaOH (2.5%, 5%, 10%) parameters at 90°C were examined for the extraction of chestnut shell. 43.61% extraction yield was obtained in water+10% NaOH, F/S: 1/10 at 90°C for 1 hour as optimum parameters. Chestnut shell extract produced in optimum conditions was used as a dyeing agent in leather process. Potassium aluminium sulphate [KAl(SO4)2.12H2O], copper sulphate [CuSO4.5H2O] and Ferro sulphate [FeSO4.7H2O] mordants were used after dyeing process to increase the fastness properties of leather. Rub, perspiration and light fastnesses were examined on the dyed leathers. Colour measurements of leathers were also carried out with Konica Minolta CM-3600d spectrophotometer. Mordants did not show significant effect on colour but fastness values varied by the used mordant types.
Authors and Affiliations
Ersin ONEM, Gokhan CIN, Ataman ALANKUS, Hasan PEHLIVAN, Mehmet Mete MUTLU
Keywords
Related Articles
- EP ID EP533673
- DOI -
- Views 135
- Downloads 0
METHOD FOR DETERMINATION OF AMINO ACID CONTENT IN PROTEIN PRODUCTS FOR MEDICAL USE
The paper presents a method for determination of amino acid content in collagen biomaterials for medical use produced in the Collagen Department of INCDTP - Division ICPI and its validation. The method has three stages:...
COLLAGEN-ALBUMIN-GENTAMICIN HYDROGELS USABLE FOR INFECTED WOUND HEALING
The aim of this study was to develop new hydrogels for infected wound treatment. The main components of hydrogels were two proteins, one fibrous (type I collagen in the form of gel) and one globular (albumin) in differen...
SUPPLIER INVOLVEMENT IN NEW PRODUCT DEVELOPMENT: A STUDY IN THE BRAZILIAN FOOTWEAR INDUSTRY
The supplier involvement in the New Product Development (NPD) has become an important contribution to the solution of problems, which causes the process to be faster and more productive. However, it is still difficult to...
APPLICATION OF QFD METHOD IN FITNESS FOOTWEAR PRODUCTION
In order to obtain a better product it is important to integrate the consumer requests in all production levels, starting with research, design and till the end of production process. One of the most popular methods used...
PRACTICES ON ECOLOGICAL CHROMIUM TANNING SYSTEM
Chromium tanning using less chromium salts at higher initial pH values is one of the approaches offered in recent years in order to overcome environmental problems caused by conventional chromium tanning. However this sy...