VALUE STREAM MAPPING AS LEAN PRODUCTION TOOL TO IMPROVE THE PRODUCTION PROCESS ORGANIZATION – CASE STUDY IN PACKAGING MANUFACTURING
Journal Title: Production Engineering Archives - Year 2017, Vol 0, Issue
Abstract
In the paper, the method of the production process improvement with the use of lean production tools has been presented. The Value Stream Mapping (VSM) for the cardboard packaging production process has been presented. On the basis of the current state map (CSM), areas for improvement have been designated - 5 organizational changes of the process were marked out. To minimize the three basic losses excessive storage, unnecessary movement and delays, the changes were introduced in the method of inter-operative transport, supervision of the storage condition (input and output of the process), control at the processing operation and the use of a production loop. As a result of the changes, it is possible to shorten the process time, shorten the total time of operations adding value and reduce the number of non-compliant products.
Authors and Affiliations
Dorota Klimecka-Tatar
Keywords
Related Articles
- EP ID EP269779
- DOI 10.30657/pea.2017.17.09
- Views 93
- Downloads 0
Failure micromechanisms of nodular cast iron
The contribution deals with a comparison of the micro-mechanisms of failure of nodular cast irons at static, impact and fatigue stress. Several specimens of ferrite-pearlitic nodular cast irons with different content of...
Development of polyurethane paint metallic effect without cloud defect
The article presents tests results of the metallic paint system. The system consists of high solid corrosion protection primer and dual-component topcoat with a metallic gloss effect (RAL 9006). The paint system properti...
Additional components of risk assessment and their impact on the probability parameter
The article raises the issue of risk assessment and its impact on the quality and safety of work. During the assessment of the turning lathe position additional components associated with the jobs personalization were ta...
Assessment of the functioning of quality mon-itoring systemin steelworkbased on the BOST method
This chapter presents the research results on the functioning of the quality control system at the steelworks. The study was conducted using an innovative BOST method. Highlighted the need to improve processes visual ins...
Microstructural evaluation of the lacquered layer quality after corrosion load
Surface pre-treatment is one of the most important steps before applying the final surface treatment. These pre-treatments, like phosphating, alkaline degreasing, pickling in acids, is used to remove impurities from the...