Vaporisation of the Metallic Bath Component During Refining in Oxygen Converter
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2008, Vol 31, Issue 2
Abstract
The paper presents a series of researches regarding the vaporization of the component elements of the metallic bath and slag during refining in LD converter. Also, the main factors which influence the vaporization process during steel making in LD converter are studied: the converter atmosphere; the carbon content of the metallic bath; the speed of the oxygen jet; the temperature of the metallic bath; the blowing diagram. Based on these researches we sought to obtain a technology of steel made in LD converter so that the percentage of losses by vaporization is minimum.
Authors and Affiliations
Lilica IVANESCU, Alexandru IVANESCU, Elisabeta VASILESCU
Keywords
Related Articles
- EP ID EP659491
- DOI -
- Views 68
- Downloads 0
Increase of BOF Converter Life by Own Slag Coating
This paper presents a method for the improvement of the lining life of the BOF converter by slag coating, under nitrogen pressure. Own slag coating of converter lining is put in practice after steel tapping. Dolomite blo...
Researches Regarding the Influence of Steam Oxidation on Sintered Alloys Properties
In this paper is studied the influence of steam treatment applied on sintered steels and the mechanical properties and abrasive wear behavior for two different types of powder. Steam treatment was carried out at temperat...
Recycling of Cellulosic Waste in the Energy Sector
Biomass is one of the Earth’s most abundant and precious resources. It offers not only food but also energy, materials used for construction, chemicals and much more. Biomass has always been used for generating energy si...
Protective and Decorative Vacuum’s Coatings on Wares of Artistic Castings
The problem of environmental protection is extraordinarily important, and its actuality will increase with every year. In this aspect, processes of depositing of coatings in vacuum have got serious advantages before wide...
Mechano-Erosion: a Novel Test Methodology to Accelerate Erosion in Rolling Contact Fatigue Experiments
Rolling contact fatigue testing of rolling elements with low saturation temperature lubricants result, in several difficulties. Mainly, uncontrolled phase changes due to flow dynamics often cause difficulties in assessin...