Varying Gas Pressure Effect on Connecting Rod
Journal Title: International Journal for Research in Applied Science and Engineering Technology (IJRASET) - Year 2017, Vol 5, Issue 6
Abstract
The automotive industries in recent years are growing with a faster rate with an emphasis on the development of quieter engines to minimize noise and vibration. Hence by improving performance, contribution can be done to minimize the noise pollution. In present work the study of engine part, viz. piston is considered as main source of vibration and noise due to slap. The motion of piston in cylinder from TDC to BDC is of two types, primary motion and secondary motion. The CR top end is connected to piston pin and bottom end is connected to crank shaft, where the gas pressure effect will takes place. By using varying gas pressure it is possible to study the strress developed at the crank shaft contact surface. At different crank angle position the variation of stress developed wil be obtained in crank shaft. The pressure Vs crank angle curve will be compared with stress Vs crank angle graph. The gas pressure curve is obtained from the actual engine performance data of Kirloskar make. In this work the finite element model of the CR is developed and structural analysis is done in ANSYS11 software.
Authors and Affiliations
V. S. Konnur
Keywords
Related Articles
- EP ID EP24618
- DOI -
- Views 316
- Downloads 10
slugWerner Method for Buried Spherical Sources Depth Determination from Residual SP Data
Self-potential method is an electrical method that involves measurements of naturally occurring potentials, commonly associated with the weathering of sulfides ore bodies. magnetic and gravity data have been adapted to...
Smart Sustainable Cities: A Need for 21st Century
The sustainable city is a relatively recent concept which has gained increasing attention the last decades both through the international community and through grass root movements. “A smart sustainable city is an innov...
Effect of Moisture and Confining Pressure on Mechanical Behavior of Shiwalik Sandstone
The study for the effect of moisture on Shiwalik Sandstone has been carried out considering the different hydroelectric projects running in the foothills of the Himalayas. The strength of the rock depends upon its miner...
Technical Note- Study of Evapotranspiration for Pune District
the evapotranspiration is nothing but combined effect of evaporation and transpiration. The conversion of water into gaseous state with the help of sun heat is called evaporation. The process of loss of moisture from tr...
slugFlexural strength and Ultrasonic pulse velocity of Crushing Sand-Lime-Cement-Phosphogypsum Building Brick Grade SW
The present work focuses on the flexural strength and ultrasonic pulse velocity of wade sand –lime-cement-phosphogypsum building bricks grade SW. It is observed that these bricks have sufficient flexural strength and Ul...