Vibration Analysis and Optimization of Spur Gear Used in EOT Crane Machine
Journal Title: GRD Journal for Engineering - Year 2016, Vol 1, Issue 9
Abstract
A gear is a rotating machine part having cut tooth, which mesh with another toothed part in order to transmit torque. To design the spur gear to study the weight reduction and stress distribution for cast steel and composite materials. Gearing is one of the most critical components in a mechanical power transmission system, and in most industrial rotating machinery. The main objective of this research work is to introduce a new gear material for gear. EN32A, EN24 is selected for suitability analysis. Gears are the important part of any machine application like electric overhead travel, machine tool, automobile for power transmission. The main part of this research work is to identify the natural frequency and natural vibration modes of EN32A, EN24 gear and also the effect of change in mass of gear. This project is based on the topology optimization of the existing gear with the reduction of material from the gear and to reduce the total weight of the gear. F.E. Modelling shall be pursued for deriving analytical solution to the problem while physical experimentation would be done to offer inputs to the work and validate the model at the initial phase of work. Hyper Works is being considered as a CAE tool for Pre-processing, Solving and Post processing. The experiment would be performed on the physical setup for the existing/ benchmark case.
Authors and Affiliations
Yogesh P. Chaudhari, Swapnil S. Kulkarni, Prof. Amol B. Gaikwad
Keywords
Related Articles
- EP ID EP219794
- DOI -
- Views 100
- Downloads 0
Analysis of Delay and Travel Time for Pre-timed Traffic Signal Coordination on Close Continuous Intersections
Signal Coordination of consecutive intersections were carried out by thumb rule by coupling the indices depend on ratio of traffic volume to distance as well as modelled flow. As eminent resolution data is easily availab...
Safemet – To Redefine Mine Safety
A smart helmet is to be developed that can detect hazardous events in mining industries, tunnel works, etc. These areas are subjected to many hazardous situations. Let’s considered the three main types of hazard that usu...
A Survey on Roadside Units Using Vehicular Adhoc Networks
The future application of vehicular ad hoc network (VANET) will be event driven and it will delivered different types of events to moving vehicles within a specified time. In this paper we propose publish-subscribe based...
Myoelectric Prosthetic Arm
A myoelectric prosthetic arm can replace the missing arm that has been lost due to accident or diseases. This physical impairment limits the motor abilities of human arm. Our project aims to develop a cost effective arm...
A Comparative Study of Constant Speed and Variable Speed Wind Energy Conversion Systems
In the early development of the wind energy, the majority of the wind turbines have been operated at constant speed. Subsequently, the number of variable-speed wind turbines installed in wind farms has increased. In this...