Vibration Analysis of Spur Gear- FEA Approach
Journal Title: International Journal for Research in Applied Science and Engineering Technology (IJRASET) - Year 2015, Vol 3, Issue 11
Abstract
Gears are used for a wide range of industrial applications. They have varied application starting from textile to aviation industries. They are the most common means of transmitting power. They change the rate of rotation of machinery shaft and also the axis of rotation. For high speed machinery, such as an automobile transmission, they are the optimal medium for low energy loss and high accuracy. During operation, meshed gears‟ teeth flanks are submitted to high contact pressures and due to the repeated stresses, damage on the teeth flanks in addition to tooth breakage at the root of the tooth is one of the most frequent causes of gear failure. This fatigue failure of the tooth decides the reliability of the gear. In this paper, spur gear made up of EN9 material is designed and mode shape of respective gear is found out.
Authors and Affiliations
Subodh S. Lande, A. M. Pirjade, Pranit M. Patil
Keywords
Related Articles
- EP ID EP21410
- DOI -
- Views 238
- Downloads 5
Preliminary Studies On Biodecolorization Of Reactive Red 35 By Pseudomonas Aeruginosa Arsks20
Pseudomonas aeruginosa ARSKS20, an antibiotics sensitive strain could decolorize Reactive Red 35(RR35) dye up to 95% with 8.27 mg l-1 h-1 at 40°C, pH 8, under static condition at 100 mg l-1 concentration. Yeast extract...
Evaluation of Electrical and Mechanical Properties of Particulate Filled Natural Fiber Reinforced Vinyl ester Composites
Globally natural fiber based structured polymer composite materials are emerging material of various disciplinary. In general the natural fiber composites are low cost, no health hazard, electrical insulation, good mech...
A Novel Work for Improving Security and Challenges using Fuzzy Logic Approach in VANETS
Vehicular AdHoc networks are the most emerging technologies in now-a-days. VANETs have many challenges like security and time latency when users are travelling in the roadways. There are many techniques available to ove...
Integral based Load Frequency Control
The aim of this paper is to model, carry and analysis of Load frequency control in three area power system. Load frequency control of multi-area interconnected thermal generating areas means zeroing of the integral area...
Trend of Terahertz in Metamaterials
Interest in engendering, identifying and deploying terahertz (THz) waves by using either photonic or electronic properties of the material in THz frequencies is still challenging part, where the metamaterials open a pat...