Waste Minimization by Reuse and Recycling
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2009, Vol 32, Issue 2
Abstract
Recently, pollution prevention directs attention towards the elimination or reduction of undesired by- products within the production process itself before treatment. On the long term, pollution prevention through waste minimization and cleaner production is more cost-effective and environmentally sound than traditional pollution control methods. The objective of this work was to carry out a feasibility study to define and implement an integrated pollution prevention and control measure in order to minimize waste and therefore to achieve compliance with the Romanian Environmental law.
Authors and Affiliations
Daniela L. NEGOITA, Ion ION
Keywords
Related Articles
- EP ID EP655964
- DOI -
- Views 70
- Downloads 0
The Importance of Using Membranes in Seawater Desalination as a Result of Excessive Exploitation of Water Sources
This paper is a detailed study of the need to find and implement new solutions for water filtration and the promotion of modern techniques that are more effective than traditional methods. As a result of extension waste...
Phosphate Passivation Solutions Enhanced by Chemical Additives for Treatment of the Hot Dip Galvanized Steel
To stabilize the surface of the galvanized steel it is important to apply a passivation treatment during its manufacturing. The general aim of the passivation treatment is to prevent the formation “storage stain” or “whi...
Aspects Regarding the Atmosphere Pollution Monitoring
This paper presents information regarding the variation of aerosols concentration in a central area in Galati city. For a period of time of 2 years and 5 months, there have been done correlations between aerosols concent...
Electrochemical Corrosion Properties of SiC/Ni Nano-Composite Coatings in 0.5M NaCl
Nano particles have an influence on nickel electrocrystallisation steps: decreasing charge transfer resistance and activating the nickel reduction. The SEM – EDX surface morphology and TEM structure of the electrodeposit...
Structural and Tribological Aspects on Ti (C,O,N) Magnetron Reactive Sputtered Thin-Films
Magnetron sputtering is a flexible technique and allows producing a significant amount of types of coatings. Within the frame of present work, Ti-C-O-N thin films were deposited onto high-speed steel (AISI M2), substrate...