Water Jet Interaction within Material Cutting Processes
Journal Title: Annals of WULS, Forestry and Wood Technology; Zeszyty naukowe SGGW - Year 2015, Vol 91, Issue
Abstract
Water Jet Interaction within Material Cutting Processes. The article is dealing with the issue of aglomerated materials (chipboards and fiberboards) cutting by an abrasive water jet at the pressure of 400 MPa with abrasive agent (GMA Australian garnet, 80 MESH grain) and its impact on its cutting gap width. The experiment was carried out at feed speeds of 0.2, 0.4 and 0.6 m.min-1 and the abrasive agent mass flow of 250 g.min-1, 350 g.min-1 and 450 g.min-1. The results indicate the energy potential of the abrasive water jet. Based on the results, an optimum feed speed of 0.4 m.min-1 and the abrasive agent optimum mass flow rate of 450 g.min-1 can be determined for the aglomerated materials cutting.
Authors and Affiliations
MONIKA KVIETKOVÁ, MIROSLAV GAŠPARÍK
Keywords
Related Articles
- EP ID EP359927
- DOI -
- Views 71
- Downloads 0
Impact of structures of selected lounge furniture seats on the comfort of use
Impact of structures of selected lounge furniture seats on the comfort of use. The main objective of the study was to determine the impact of structures of four seats on comfort during short-term use. Fifty-five voluntee...
The reduction of vibrations in circular sawing machines
The reduction of vibrations in circular sawing machines. The presented in this paper the main objectives of the research were to explore vibrations signals of the main spindle system, the machine tool body and a circular...
Methods and possibilities for conservation of antique wooden floor in Poland – theory and practice
Antique wooden floors with decorative panel parquets have different preservation condition as well as historic and artistic values. Therefore, renovation and conservation works must be adjusted to a various level of wear...
Strength and modulus of elasticity of pine structural round timber
Strength and modulus of elasticity of pine structural round timber. The article presents the results of the basic physical and mechanical properties of pine (Pinus sylvestris L.) structural round timber originated from L...
Effect of lignin addition on the performance of microbial fuel cell
Effect of lignin addition on the performance of microbial fuel cell. Lignin was reported to have inhibitory effect on MFC operation. Products of lignin degradation were shown to decrease bacteria viability and efficiency...