Ways of Working the Data Obtained Through Atomic Force Microscopy Technology
Journal Title: RECENT - Year 2011, Vol 12, Issue 31
Abstract
The article presents a series of methods of working the data obtained through Atomic Force Microscopy technology. It shows the way in which the obtained data can be used and read through the Labview programming language. Emphasis is also laid on a series of advantages resulting from scanning by the direct contact or the non-contact method. AFM consists of a sharp microfabricated tip attached to a cantilever, which is scanned across a sample. The deflection of this cantilever is monitored using a laser and photodiode and is used to generate imaging or spectra of the surface. The AFM works in a number of different modes.
Authors and Affiliations
Marius BENŢA, Cosmin AFRENŢOAEI, Eusebiu PAIU, Laurenţiu TODORAN, Octavian DADU
Keywords
Related Articles
- EP ID EP129418
- DOI -
- Views 60
- Downloads 0
Spherical Hypocycloids and a Technical Application: Spherical Hypocycloidal Automatic Machines for Cold Forming
Plane hypocycloidal automatic machines, which form an entire family, are a Romanian original concept developed at Transilvania University of Brasov. Recent researches have enhanced the concept development towards a very...
Contribution to the Performances Improvement of a Machine Boring Mill Operation
The performances requested from the production equipment and the associated economic issues bring the originators and the users of production means to be interested in the failures of the materials, with their consequenc...
REDUNDANT INVERSE KINEMATICS SYSTEM FOR OBSTACLES AVOIDANCE
In this paper the authors relate to the robotic systems to avoid the obstacles while positioning end-effectors. A new strategy to on-line collision-avoidance of the redundant robots with obstacles is presented. The strat...
Effect of the Influence of Hydrolyzate of Molluscs on the Oxidation of Vegetable Oil
Given the results of research of antioxidant properties of the hydrolyzate of molluscs; determined by the induction period the oxidation of sunflower oil and the constant of chain termination, which show the effectivenes...
Methodology for Preliminary Determination of the Competitiveness of Metal Structures
The present work shows a methodology for preparing an offer that outlines competitive advantages of the metal construction of overhead cranes when these cranes are considered as logistics machines. The competitiveness is...