Wear and Corrosion Resistance of CrN-based Coatings Deposited by R.F Magnetron Sputtering
Journal Title: Tribology in Industry - Year 2015, Vol 37, Issue 1
Abstract
A comparative study was conducted to evaluate the performances against wear and corrosion of CrN, CrMoN, CrZrN, CrVN single layer thin films. The latest are synthesized onto steel substrates (DIN 90CrMoV8), using R.F reactive magnetron co-sputtering. The experimental work was achieved using ball-on-disc configuration in dry conditions against WC balls. The main conclusions are: (i) electrochemical tests in 0.3 wt.% NaCl solution indicated that CrZrN are improved anticorrosion performance when compared to CrN, while CrMoN demonstrated a poor corrosion resistance;(ii) the CrN coating presents the better tribological properties when compared to the ternary nitride coatings.
Authors and Affiliations
K. Bouzid , N. E. Beliardouh , C. Nouveau
Keywords
Related Articles
- EP ID EP95004
- DOI -
- Views 150
- Downloads 0
Friction and Wear in Timing Belt Drives
Timing belt tooth goes into contact with a drive pulley, stretched to the maximum, because of the previous tension. When the contact begins the peak of the belt tooth makes the contact with the outer surface of the pulle...
Influence of Combined Hard and Fine Machining on the Surface Properties of Cemented Carbides
As a result of recent developments in cold forging cemented carbides are increasingly used as tool materials. Due to their high hardness only electrical discharge machining (EDM) and grinding are suitable for tool machi...
Tribological Behaviour of Smart Fluids Influenced by Magnetic and Electric Field – A Review
This review paper highlights the tribological behaviour and performance of smart fluids. Two main kinds of smart fluids, that respond to a suitable external stimulus are investigated – electrorheological and magnetorheol...
Analysis of Tribological Behaviour of Functionally Graded LM13 Aluminium/TiS2 Composite Using Design of Experiments
Functionally graded LM13 aluminium/10wt% TiS2 composite was fabricated by centrifugal casting method and hollow cylindrical part has the dimension of 150x150x20 mm was obtained. The microstructural evaluation and vicker’...
Tribological Properties of Silicone Rubber-Based Ceramizable Composites Destined for Wire Covers. Part II. Studies of Ball-on-Plate, Plate-on-Plate and Ring-on-Plate Friction Contact
Tribological properties of commercially available silicone-based ceramizable composites were studied. Friction forces of three different types of ceramizable composites were measured against three different-shape steel s...