Wear Behavior of AL 7075/FA/SiC Hybrid Composites
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2019, Vol 9, Issue 2
Abstract
This research examined the influence of sic and fly ash on the wear behavior of Aluminum 7075/5 and weight percentage of hybrid complex. Aluminum alloy 7075 strengthened with sic-fly ash were examined. The effectiveness of integration of sic in the composite for obtaining wear reduction is investigated in this study. Using under stir casting route, the composites were made-up. Ceramic elements were incorporated into aluminum alloy matrix along with solid lubricating materials to improve the friction coefficient and to achieve the decrease in both wear resistance. With 5 and 10 weight percentage of sic /fly ash particles, the Aluminum 7075/fly ash/sic hybrid compound was made. The wear properties of the hybrid composites including sic expressed the superior properties of wear-resistance.
Authors and Affiliations
Ramakanth U. S, Putti. Srinivasa Rao
Keywords
Related Articles
- EP ID EP582052
- DOI 10.24247/ijmperdapr201932
- Views 79
- Downloads 0
Design & Analysis of Improvised Clutch Pedal Linkage Mechanism using CATIA V5
In the contemporary world of nowadays uncountable innovations has embark within the automobile sectors within the gift decades. The expected speed demand of the vehicle guides the foot pedal to interact or disengage the...
MECHANICAL PROPERTIES OF GLASS/BAMBOO FIBERS REINFORCED EPOXY COMPOSITES COMPARING WITH CHOPPED STRAND MAT TREATED WITH BACTERIAL CELLULOSE
Fiber-reinforced epoxy composites have played a principal role for a lengthy time of applications for their strength, cost-effectiveness, lightweight, and degradability. An innovative method of manufacturing rigid and ro...
The Investigations On Aluminium Substrates Coated With Micro-Sized WC-Co /Cr3C2-NiCr Multi-Layered Hard Coating
The aim of this paper is to analyze the enhanced properties of aluminium substrates by coating with multilayered hard coatings. In this study, coating containing alternative filmy layers of micro-sized chrome carbide– ni...
An Experimental Analysis and Process Parameter Optimization on Friction Stir Welded Dissimilar Alloys
The aim of this exertion is to examine on the tensile strength of dissimilar aluminium sheets are (AA6063 and AA5052) joined by FSW. The two aluminium sheets are arranged in a line with perpendicular rolling directions o...
Thermal Analysis of Fins with Modified Tips
Fins, the topic of this analysis, is an extended surface which is used as a source of increasing the rate of heat transfer for beneficial aspects. This is a steady state analysis. The edge of the fins is configured with...