Wear Behaviour of Aluminium Matrix Hybrid Composites: A Review
Journal Title: JOURNAL OF ADVANCED RESEARCH IN MECHANICAL ENGINEERING AND TECHNOLOGY - Year 2019, Vol 6, Issue 1
Abstract
This review focus on the effect of reinforcement and different manufacturing techniques on wear and mechanical properties aluminium matrix composites and hybrid composites. These materials have capacity to satisfying the demands of advanced engineering materials applications. These difficulties are satisfied due to improved mechanical properties, conventional processing technique and reducing fabrication cost of aluminium composites. In powder metallurgy, the crucial issue is the selection of sizes of the matrix and reinforcement powders, whereas a major challenge in liquid metallurgy is wettability between the reinforcement particles and molten alloy. The addition of Al2O3particles in matrix increases the mechanical strength and wear resistance of composites. However, incorporation of these particles can reduce the wear performance of Al composites under severe conditions. The addition of graphite particles helps in the formation of a thick layer on the wear surface. It was found that the mechanical and wear properties of the single reinforcement composites are better as compared to pure aluminium and aluminium alloys regardless of the aluminium matrix composites fabrication technique. Further, it was also established that most of the hybrid composites demonstrate better mechanical and tribological properties as compared to single reinforcement composites.
Authors and Affiliations
Shivdev Singh, Ajay Gupta, Vishal S Sharma
Keywords
Related Articles
- EP ID EP669381
- DOI 10.24321/2454.8650.201903
- Views 136
- Downloads 0
Neural Computing for Determining the Accuracy of Ultimate Tensile Strength of Friction Stir Welded Joints by using Various Activation Functions
Activation functions in a particular Artificial Neural Network (ANN) architecture plays a vital role. It imparts non-linear properties to our Neural Networks. There is a complicated and non-linear complex functional mapp...
Usage of Additive Manufacturing Techniques in Producing Orthotic Insole
Usage of 3 D printed objects has gained a huge interest in recent years. This has led to a variety of 3 D printed ready to use products in today’s market. In this review paper, the usage and testing of 3 D printed orthot...
Vehicle Yaw Rate Control Based on Fuzzy PID Control Technology
n this paper, control of vehicle yaw stability system is studied by using a two vehicle models where the first one is a linear two degree of freedom vehicle model to design the controller and the other one is a planar mo...
Experimental Study For Heat Transfer Enhancement of a Radiator using Twisted Inserts with Different Coolants
The radiator is used for cooling the internal combustion engine cylinder with the help of different coolant fluids. It is an essential part for any IC engine for its proper and smooth operation. In radiator the coolant f...
Study of Blast Furnace Stave Cooler Based on Heat Transfer Analysis
The life of blast furnace is increase due to technology of furnace cooling very important method for metallurgical industry. Blast furnace mathematical model of stave cooler has been developed for heat transfer analysis...