What are cleats? Preliminary studies from the Konin lignite mine, Miocene of central Poland
Journal Title: Geologos - Year 2014, Vol 20, Issue 1
Abstract
Cleats (fractures, joints) are discontinuities in coals, including lignites. They are important in mining activity because of their gas and water permeability in hard coal, and mainly because of their water permeability in lignites. As opposed to hard-coal cleats, lignite cleats have not been studied in detail before. The present contribution does so, using as an example the 1st Middle-Polish Lignite Seam (MPLS-1) in the Jóźwin IIB opencast mine in central Poland. It should be mentioned here that any remarks in the present contribution concerning MPLS-1 refer exclusively to this lignite seam in the Jóźwin IIB opencast mine. The investigated discontinuities consist of two sets, i.e. the face and butt cleats, which are roughly oriented NW–SE and NE–SW, respectively. The mean spacing of the face cleats is ~12.4 cm, while the mean spacing of the butt cleats is ~12.8 cm. The maximum average aperture is ~4.9 mm for the face cleats and ~4.1 mm for the butt cleats. The cleat spacing and aperture do not depend on the lignite thickness, but the cleat spacing increases with increasing mineral-matter and xylite content, whereas the aperture increases when the contents decrease. The regional folding and local salt diapirism tentatively explain the formation of the orthogonal system of the lignite cleats, partly because of the parallelism of the face cleats and the major tectonic directions in central Poland.
Authors and Affiliations
Marek Widera
Keywords
Related Articles
- EP ID EP166545
- DOI 10.2478/logos-2014-0001
- Views 137
- Downloads 0
New data on Callovian (Middle Jurassic) belemnites and palynomorphs from the Northern Caucasus, southwest Russia
Palaeontological data on the Caucasus are highly important for large-scale stratigraphical and palaeobiogeographical assessment of the northern Tethyan margin, but this information is often scarce and not available in En...
Unravelling the complex nature of the Upper Weichselian till section at Gdynia Babie Doły, northern Poland
The complexity of glacial sequences may increase when these formed underneath ice sheets despite subsequent changes in their extent that are accompanied by alterations in the direction of the ice flow. Our aim was to det...
Quaternary deposits and weathered bedrock material as a source of dangerous radon emissions in Estonia
The risk of dangerous radon emissions in Estonia is high, being among the highest in Europe. In almost 33 per cent of Estonian land area, the content of radon in soil-contained air exceeds the safe limit for unrestricted...
Petrographical Analysis of Warthian Fuvioglacial Gravels as a Tool to Trace the Source Area – A Case Study From Central Poland
The petrographical features of the medium- and coarse-grained gravels (4-10 mm and 20-60 mm, respectively) of weathered and fresh (unweathered) deposits indicate, in combination with so-called indicator and statistical e...
What are cleats? Preliminary studies from the Konin lignite mine, Miocene of central Poland
Cleats (fractures, joints) are discontinuities in coals, including lignites. They are important in mining activity because of their gas and water permeability in hard coal, and mainly because of their water permeability...