Wideband bioimpedance meter with the adaptive selection of frequency grid
Journal Title: Вісник НТУУ КПІ. Серія Радіотехніка, Радіоапаратобудування - Year 2014, Vol 0, Issue 57
Abstract
Introduction. For the diagnosis of functional state and structure of biological objects with weakly expressed irregularities it is important quickly and accurately to determine the amplitude- and phase-frequency characteristics. Therefore, the purpose of the article is a representation of the results of the development of biological objects high-speed impedance meter with the ability to select adaptive grid measuring frequencies in the extended band. Structure of the impedance meter. Developed instrument is designed to measure the impedance of the object on four-electrode method. The device uses a frequency synthesizer amplitude-phase detector integrally fabricated and active electrodes, by which the voltage controlled current source and the input buffer amplifiers with low input capacitance, are located in close proximity to the studied bioobject. This allowed to make measurements at frequencies up to 5 MHz. Instruments characteristics. To test the device characteristics the frequency characteristics of the test object (RC-chain) impedance were measured. It is composed of 5 precision resistors and capacitors. Parameters of the elements were measured preliminarily by laboratory inductance, capacitance and resistance meter E7-12. The dependence of the measurement errors of the developed device in the frequency range from 1 kHz to 5 MHz is not more than 5% of the modulus of the impedance and not more than 2° of the phase.
Authors and Affiliations
V. Mosiychuk, G. Timoshenko, O. Sharpan
Algorithm of uniting of optimal one-dimensional filtering outcomes for image processing
The nonlinear algorithm of uniting of one-dimensional optimal filtering outcomes which describes the form of a posteriori probability density of image pixel is synthesized. Linear algorithm of uniting is obtained for the...
Investigation the electrical properties of copper films for integrated circuits
A comprehensive investigation of the microstructure, electrical and mechanical parameters of copper films obtained thermionic application (TIA) on the glass-ceramic substrate and polycore. The studied parameters were com...
The microwave antenna on the basis of a linear lattice connected dielectric resonators in waveguide
Its electrodynamical synthesis results of five-element antenna on cylindrical dielectric resonators situated in the apertures in metal waveguide surface has been given. Investigated antennas have acceptable radiation pat...
Investigation of the microwave generator with a resonator and delay line based on magnetostatic waves
A model was built as a ring MSW generator using as elements defining the frequency the resonator and delay line based on magnetostatic waves in epitaxial ferrite film. The features of the characteristics of the generator...
Fourier transformant area deconvolution condition. Construction of the image degradation matrix
Symbolic method of forming image degradation matrix at Adamar conversion transformants area is proposed. Algorythm of forming coefficients at distortion system impulse characteristics samples for any range of samples and...