Ziegler-Natta catalysts for propylene polymerization – Interaction of an external donor with the catalyst
Journal Title: Polyolefins Journal - Year 2017, Vol 4, Issue 1
Abstract
The interaction of the external donor (propyltrimethoxysilane - PTMS) with titanium-magnesium catalysts (TMCs) containing dibutylphthalate (DBP) as internal donor, which were prepared in different ways, was studied by chemical analysis and infrared diffuse reflectance spectroscopy (DRIFTS). The chemical composition of the catalysts after their interaction with heptane solutions of PTMS, PTMS/AlEt3 or AlEt3 during 1h at 70°C showed that this interaction led to removal of both TiCl4 and DBP from the catalysts. The fractions of DBP and Ti extracted, as well as the amounts of PTMS and AlEt3 bound, depended on the method of synthesizing the catalysts. DRIFT spectroscopy data concerning the state of DBP in the catalysts, before and after treatment with heptane solutions of PTMS or PTMS/AlEt3 during 1h at 70°C, showed that PTMS could substitute both TiCl4 and DBP, while adsorbing on coordinatively unsaturated Ti and Mg ions in the catalyst. The presence of AlEt3 played a key role in the interaction of PTMS with the catalyst. Activity data for propylene polymerization showed that treatment of TMC catalysts with PTMS before polymerization led to a sharp activity decrease due to deactivation of active sites, while the interaction of the catalyst with PTMS in the presence of AlEt3 led only to a slight decrease of activity, probably due to deactivation of non-stereospecific active centers.
Authors and Affiliations
Valentina Nikolaevna Panchenko, Ludmila Viktorovna Vorontsova, Vladimir Aleksandrovich Zakharov
Keywords
Related Articles
- EP ID EP283189
- DOI 10.22063/POJ.2016.1385
- Views 126
- Downloads 0
Macromolecular non-releasing additives for safer food packaging: application to ethylene/α-olefins and propylene based polymers
Some innovative solutions are proposed to the problem of the unavoidable physical migration of antioxidants from plastic films for packaging, in order to minimize the consequent undesirable effect of food contamination....
Propene-cycloolefin polymerization
Highly active metallocenes and other single site catalysts have opened up the possibility of polymerizing cycloolefins such as norbornene (N) or of copolymerizing them with ethene (E) or propene (P). The polymers obtaine...
Fouling mechanisms during protein microfiltration: The effects of protein structure and filtration pressure on polypropylene microporous membrane performance
A polypropylene microporous membrane (PPMM) was fabricated by thermally induced phase separation (TIPS) method. The effects of protein size and structure as well as filtration pressure on the membrane performance and fou...
Mathematical modeling the effect of catalyst initial shape and the crack pattern in olefin copolymerization
A two-dimensional (2D) single particle model for the copolymerization of propylene-ethylene with heterogeneous Ziegler-Natta catalyst is developed. The model accounts for the effects of the initial shape of the catalyst...
Modelling the catalyst fragmentation pattern in relation to molecular properties and particle overheating in olefin polymerization
A two-dimensional single particle finite element model was used to examine the effects of particle fragmental pattern on the average molecular weights, polymerization rate and particle overheating in heterogeneous Ziegle...