A Method to Address the Fixing of Sealing Deficiencies at the “Ostrovul Mic” Left Bank, “Râul Mare - Downstream” Water Development
Journal Title: HIDRAULICA - Year 2018, Vol 0, Issue 3
Abstract
The present paper proposes a method for approaching the remediation of sealing deficiencies from the left bank of Ostrovul Mic water reservoir at km1+300 (Raul Mare – Downstream water development) by executing a drain at the bottom of the side embankment downstream face. The results of the remedy are highlighted by checking the flow both as a permanent regime and as transitional regime hypothesis on a 2D numerical model.
Authors and Affiliations
Albert Titus CONSTANTIN, Gheorghe LAZAR, Alina-Ioana POPESCU-BUSAN, Serban-Vlad NICOARA
Keywords
Related Articles
- EP ID EP485619
- DOI -
- Views 158
- Downloads 0
Algorithm for Optimal Design of Pressurized Toroidal LPG Fuel Tanks with Constant Section Described by Imposed Algebraic Plane Curves
The purpose of this study is to provide a tested, validated, and documented algorithm for optimal design of pressurized toroidal LPG fuel tanks with constant section described by imposed algebraic plane curves. Computer...
Fluid Flow Particularities within Hydraulic Working Circuit
As is known from the principles of fluid mechanics, the flow phenomenon of the working fluid within a hydraulic circuit is always accompanied by energy losses that are inevitably determined by the frictional forces with...
A New Solution for Water Aeration
The paper presents a new solution of water aeration, namely: the introduction of compressed air into the water transport pipes. This eliminates those reservoirs, pumps, decanters, ponds, etc., which pursue the interventi...
Comparative Study of a 1D and 2D Numerical Analysis Modelling a Water Flow at a River Confluence under Accidental High Waters
There are presented two numerical simulations – 1D and 2D – regarding the water flow on Timiş River in the Town of Caransebeş, Romania, at the confluence with its tributary Sebeş River. There was considered an accidental...
The Influence of Corrosion and Pressure Variation on the Minimum Safety Factor of a 3D Hexagonal Toroid with Regular Hexagonal Cross-Section Used in Manufacturing of LPG Storage Tanks
This research was aimed to explore the minimum safety factor (SF) values of a three-dimensional (3D) hexagonal toroid with regular hexagonal cross-section used in manufacturing of LPG storage tanks from the automotive in...