A Modal Analysis Study of Thin Parallelogram Plates Clamped on the Rim with and without Defects Using the SolidWorks Program

Abstract

This paper presents the study of the modal analysis of four types of plates in parallelogram shape, with or without defects, using the SolidWorks program. The results obtained after this study, have targeted the behavior of plates regarding the mesh, the deformation scale, the resultant amplitude, the rotational speeds, respectively the Eigen frequencies according to the vibration modes.

Authors and Affiliations

Marian-Dumitru Nedeloni, Cornel Hațiegan, Florian Muntean, Marcel Jurcu, Irina Maria Terfaloaga, Petru Magheţi

Keywords

Related Articles

Analysis of Tensile Strength of Bamboo Reinforced Polyester Composite

Nigerian grown species of bamboo called bambusa vulgaris which was examined to analyze its tensile strength. The fibre characteristics and tensile strength were investigated at three different fibre lengths and fibre loa...

Optimising the Design Process of the Injection Cam-shaft by Critical Path Method (CPM)

In the present paper a series of advantages of the CPM method are presented, focusing on the optimization of design duration of an injection camshaft, by cost criteria. The minimum duration of finalizing the design of th...

Improving Compensation Performance in Three-Phase Active Power Line Conditioners by DC-Voltage Control

This paper analyses the influence of the prescribed DC-link voltage on the filtering efficiency, in terms of current harmonic distortion after compensation, in a three-phase three-wire shunt active power line conditioner...

Students Perception Regarding the use of Virtual Instruments in Teaching and Learning Process

In addition to the use by students of laboratories and hands-on learning, teaching-learning can be improved by using Virtual Instruments. A questionnaire was administered to find the students' opinion on the use of virtu...

Aspects regarding the Valorization of the Air Jets Energy Potential from Industrial Technological Equipment

In the context of obligations to reduce greenhouse gas emissions to which EU countries have pledged, reducing energy consumption is a necessity of the current period. Thus, within Energy Strategy, Romania was among the f...

Download PDF file
  • EP ID EP449179
  • DOI -
  • Views 86
  • Downloads 0

How To Cite

Marian-Dumitru Nedeloni, Cornel Hațiegan, Florian Muntean, Marcel Jurcu, Irina Maria Terfaloaga, Petru Magheţi (2015). A Modal Analysis Study of Thin Parallelogram Plates Clamped on the Rim with and without Defects Using the SolidWorks Program. Analele Universitatii "Eftimie Murgu" Resita. Fascicula de Inginerie, 22(2), 273-288. https://europub.co.uk./articles/-A-449179