A Study on Surface Roughness and Cutting Width for Circular Contour Machining of Stir Cast AA6063/SiC Composites in WEDM
Journal Title: JOURNAL OF ADVANCES IN CHEMISTRY - Year 2017, Vol 13, Issue 10
Abstract
Wire electrical discharge machining is used in machining electric conductive materials with intricate shapes and profiles. This paper presents an experimental investigation on the influence of cutting conditions of WEDM on surface roughness and cutting width of machining of AA6063/SiC composites. Here a semi cylindrical piece is removed from a rectangular plate of AA6063/SiC composites plate fabricated with reinforcing SiC in 0%, 5%, 10% and 15% weight fractions through stir casting. The effect of WEDM parameters such as pulse on time, pulse off time and peak current on surface roughness and cutting width on different composition of AA6063/SiC were analyzed for circular contour machining. The experimental results show that increase in percentage of SiC has high influence in mechanical behavior of AA6063/SiC composites and the effect of pulse on time is very significant in reducing the surface roughness and pulse off time plays an important role in producing minimum cutting width.
Authors and Affiliations
I. Balasubramanian
Keywords
Related Articles
- EP ID EP653100
- DOI 10.24297/jac.v13i10.5829
- Views 170
- Downloads 0
Structural, Thermal behaviour and Vibrational study of a new Cesium- Ammonium Dihydrogen Phosphate Arsenate: Cs0.55(NH4)0.45H2(PO4)0.39(AsO4)0.61
Mixed crystals Cs0.55(NH4)0.45H2(PO4)0.39(AsO4)0.61 (CADPA) of the two antiferroelectric NH4H2PO4 (ADP) and NH4H2AsO4 (ADA) and of the two ferroelectric CsH2PO4 (CDP) and CsH2AsO4 (CDA) have been prepared by slow evapora...
GROUPING PRECISION IS ENHANCED WITH BASIC PIECES AND CLASS LIMIT CALCULATION USING DATA CLUSTER
Organize frameworks are utilized to see the exchange stamp. Finding the cases and exceptional cases is one of the fundamental issues in the field of information mining. Particularly in the field of human organizations ex...
Exocyclic enaminones as building blocks for synthesis of bioactive polyheterocyclic compounds
The reaction of exocyclic enaminones namely, 2-(dimethylaminomethylene)-3,4-dihydro-2H-naphthalen-1-one, 3-(dimethylaminomethylene)-thiochroman-4-one and 2-(dimethyl-aminomethylene)-indane-1,3-dione, each with heterocy...
INHIBITIVE ACTION OF IMIDAZOLES FOR COPPER CORROSION IN SULFURIC ACID MEDIUM
The corrosion inhibition of copper in the presence of 10-3 M of imidazole derivatives; Imidazole (IM), 2-Methyle imidazole (MIM), Benzimidazole (BIM) has been investigated in 1.0 M H2SO4 solution using potentiodynamicÂ...
Kinetic Study of the Dissolution of Tunisian Natural Phosphate or Francolite in Industrial Phosphoric Acid
A kinetic study of dissolution of Tunisian natural phosphate or francolite whose particles have a mesoporous texture inindustrial phosphoric acid is carried out. Therefore, We focused on the study of the influence of cer...