A STUDY ON THE SPEED CONTROL OF A BLAC MOTOR BY BACK-EMF FEEDFORWARD COMPENSATION
Journal Title: International Journal of Electrical and Electronics Engineering Research (IJEEER) - Year 2017, Vol 7, Issue 1
Abstract
A PI controller is used to control the speed of a motor, but the gain of the PI controller is limited according to the system. Thus, the PI controller alone cannot meet the control performance requirements of the motor. A method involving back-electromotive force (back-EMF) compensation can solve this problem. Here, a feedforward compensation method based on the speed is used to compensate for the back-EMF. However, it is difficult to measure speed in the extremely low speed range, so it is difficult to compensate the back-EMF. In addition, the rate of the back-EMF compensation is modified by adjusting the gain. This proposed method of the back-EMF compensation is proven by simulation and experiment. The root mean square (RMS) value for the speed error is measured when the back-EMF is compensated for, when the back-EMF is not compensated for and when the gain of the back-EMF compensation is adjusted. The study confirms that the proposed algorithm is superior in the RMS value of the speed error.
Authors and Affiliations
DONGHOON BAN, JAESEUNG HONG, SUNGHO JIN, SEONGHUN LEE
Keywords
Related Articles
- EP ID EP221697
- DOI -
- Views 162
- Downloads 0
HEALTH STRUCTURE MONITORING AND TRACKING USING WSN
This paper presents the prototype design of an patient’s vital status provided by smart technology. The prototype system collects vital status and sends to medical examiners in emergency or criti...
Automatic Solar Photovoltaic Battery Monitoring and Theft Control system
Being able to monitor the SPV battery remotely then it makes important to reducing time and cost associated with site visits. This is obviously especially important for an-off-grid system, which is often in even harder t...
DAMPING OF LOW FREQUENCY OSCILLATION USING COORDINATED CONTROL STRATEGY OF PI AND UPFC DEVICES
Rapid growth of Indian economy has stirred a tremendous need for power and has resulted in operation of power infrastructure to their limits. One important impediment in operating the power infrastructure at their maximu...
Modelling and Simulation of BLDC Motor for Industrial Applications
Permanent magnet synchronous motor has attracted by various applications such as commercial, domestic and industrial due to low cost and its several advantages. The main purpose of this paper is to describe Brushless DC...
Design of Inset-Fed Triple-Band Rectangular Microstrip Antenna for Wimax, 5.5 Ghz Wlan and Lower X-Band Satellite Applications
In this paper, a novel design of triple-band inset-fed rectangular micro strip antenna with T-shapeslitloade disproposed for WiMAX, 5.5 GHz WLAN and lower X-band satellite applications is presnted. The proposed antenna c...