An Analytical Procedure for the Prediction of the Stress-Strain State in Notches under Multiaxial Fatigue
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2008, Vol 31, Issue 2
Abstract
This work presents an analytical procedure for estimating elastic-plastic stresses and strains in notched shafts subjected to synchronous non-proportional torsional and tensile cyclic loading. The specification of the equivalent stress concentration factor is firstly accomplished. Neuber’s rule in conjunction with the assumed material law provides the relation between the applied loading and the equivalent stress and strain. Principal stresses and strains yield from the corresponding equivalent values incorporating Hencky’s equations. The transformation of the principal stresses and strains to the appropriate coordinate system yields the final result. For the assessment of the analytical procedure, notch stress-strain results from several finite element analyses of an axisymmetric cylindrical shaft with a circumferential groove subjected to multiaxial synchronous fatigue loading are presented. A satisfactory agreement between the analytical and numerical results is observed.
Authors and Affiliations
Nikolas PITATZIS, Alexander SAVAIDIS, Georgios SAVAIDIS
Keywords
Related Articles
- EP ID EP658892
- DOI -
- Views 53
- Downloads 0
Electrochemical Deposition and Characterization of Doped Poly (3,4-Ethylene Dioxythiophene) for Potential Use as a Biosenso
In this study, conducting polymer films of poly(3,4-ethylenedioxythiophene) (PEDOT) were electrodeposited onto a platinum electrode from an aqueous micellar medium. The electroactivity of the undoped and doped PEDOT film...
Glow Discharge Optical Emission Spectrometry (GDOES), an Effectiveness Method for Characterizing Composition of Surfaces and Coatings
Within the frame of this work, the technical procedures and real advantages of using Glow Discharge Optical Emission Spectroscopy (GDOES) for establishing depth concentration profiles of surfaces are presented. GDOES can...
Corrosion Behaviour of Tombac Used in Cult Objects Manufacturing
Corrosion of metals and metallic alloys is due to their thermodynamic instability in relation to their oxidation form. Corrosion tests performed in this work simulate the exposure conditions in different environments of...
Manufacture of Stud Link Chain Cable made of Grade U1 and U2 Steel
We have analyzed the fabrication technology of the link chain cable made of grade U1 and U2 steel from TREFO S.A. Galati and we had in view during the experiments several rolling programs. The main characteristics of a p...
Researches Concerning the Deformation Behaviour of Low Carbon Steel
The paper shows the results of the researches meant to establish the equation of deformation behavior of low carbon steel. The behavior law is established by the experimental way, using the torsion test method. The compo...