An Approach for Engineering Tuning of Smith Predictor with Dynamic Object from High Order
Journal Title: International Journal of Engineering Innovations and Research - Year 2018, Vol 7, Issue 5
Abstract
An approach is proposed for engineering tuning of Smith predictor with a dynamic object from high order. There is a proposal to solve the problem by solving the characteristic equation (controller-compensator). As a result of the high order dynamic system analysis, the tuning parameters of the Smith predictor are calculated. The transitionаl processes of the system (controller-compensator) are dealt with by assignment. For the transitional process by assignment, overshoot occurs. If a comparison of the overshoot of the transitional process by assignment (obtained in simulation) is made, 0,1 % inaccuracy is observed in theory. Therefore, the proposed approach for engineering tuning of Smith predictor with a high order dynamic object is suitable for use in high order dynamic systems analysis.
Authors and Affiliations
Georgi Petrov Terziyski, et al.
Keywords
Related Articles
- EP ID EP498081
- DOI -
- Views 93
- Downloads 0
Dependence of Ultimate Bending Moment of Box Girders on Panel’s Slenderness
The structural behavior of box-girders under pure bending moment is analyzed and discussed on the basis of the results of experiments performed by the author. The box girders are geometrically similar but made of differe...
Evaluation of Fuel (Biodiesel) Quality Parameters of the Seed Oil of Sweet Melon (Cucumis Melo)
Oil was extracted from the seeds of Sweet melon (Cucumis melo) using n-Hexane as a solvent. The physico-chemical properties of Cucumis melo seed oil (CMSO) such as specific gravity, viscosity, moisture content, refractiv...
Simulating Vector Control Driver using Maximum Torque Strategy on Current Permanent Magnet Assisted Synchronous Reluctance Motor
Permanent Magnet Assisted Synchronous Reluctance Motor is one of the new motors introduced in transportation industry, which have been introduced as a possible tractions motors in hybrid electric vehicle applications. Ac...
Study of Mechanical Behaviour Natural Fibers Reinforced Composite Materials
In this work the investigation of experimental study of the evaluation of the different natural fiber as reinforcement with epoxy composites of mechanical properties. Composites were fabricated using Sisal/epoxy, Banana/...
Numerical and Experimental Study of Evaporation of Liquid Effluent Flowing on an Inclined Plate
This work deals with the recovery of liquid effluent by thermal evaporation. The effluent is a digestate of pig manure which is subjected to anaerobic digestion and phase separation by centrifugation. Its dry matter is a...