An Investigation Of The Effects Of Solid Solution Temperature On The Wear Performance Of Aged AA7075 Alloy
Journal Title: Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji - Year 2018, Vol 6, Issue 1
Abstract
In this study, the effects of different solid solution temperatures (465 °C, 470 °C, 475 °C, 480 °C and 485 °C) before aging heat treatment on the microstructure and wear behaviors of AA7075 were investigated. Scanning electron microscope was used for microstructure examining of aged samples. Wear tests were performed on pin-on disc type wear device at 1.5 ms-1 sliding speed with four different sliding distance (500 m, 1000 m, 1500 m and 2000 m) under 30 N loads at room temperature. As a result of the study, the hardness values were increased with increasing solution temperature. In the wear tests, the lowest weight losses were determined in the solution treated at 485 °C and aged at 120 °C for 24 hours in AA7075 alloy. Generally, it was observed from worn SEM images that both abrasive and adhesive wear mechanisms were active.
Authors and Affiliations
Musa YILDIRIM, İjlal ŞİMŞEK, Dursun ÖZYÜREK
Keywords
Related Articles
- EP ID EP489690
- DOI 10.29109/http-gujsc-gazi-edu-tr.336024
- Views 98
- Downloads 0
Next Generation Emergency Call System For Turkey
Next Generation Emergency Notification System after emergency call (eCall) equipped vehicle regulations with the legislation EU-2015/758 will be an obligation in EU in 2018 and eCall units are set up into the vehicles in...
Analysis of Long-Term Global Solar Radiation, Sunshine Duration and Air Temperature Data of Ankara and Modeling with Curve Fitting Methods
The information about solar parameters is important in the installation of photovoltaic energy systems that are reliable, environmentally friendly and sustainable. In this study, initially, long-term global solar radiati...
The Comparison of the Outdoors of Middle and High Income Group Mass Housing in The Context of Environmental Psychology
Mass housing projects, which started to develop in Turkey since 1980’s, continue to be produced rapidly through private entrepreneurs, cooperatives and government agencies today. Similar repetitions of mass housing proje...
Modelling of Wind Farms and Analysis of Effects of Wind Farms on Transmission System
In recent years, the energy demand in Turkey and the world is increasing day by day in parallel with the population growth and the developments experienced in technology. Renewable energy resources are rapidly spreading...
3-Degree of Freedom Gap Clearance Control of A New Generation Maglev Conveyance Vehicle
In this study, a transport vehicle based on magnetic levitation technology, which is obtained by combining 3 linear motors and hybrid electromagnets, has been proposed for providing a flexible and modular conveyance syst...