Analiza wpływu szumów konwertera LNB na odbiór sygnałów satelitarnych
Journal Title: Autobusy. Technika, Eksploatacja, Systemy Transportowe - Year 2017, Vol 208, Issue 6
Abstract
One of the parameters to characterize the properties of the antenna is noise figure. The noise figure of LNBs is a measurement of how sensitive the LNB is or how much noise the LNB will add to the signal you may be intending to receive. In recent years we can observe a dynamic tendency to fast decrease of the noise figure of LNBs. Standard converters and waveguide converters used in polarizers and feedhorns have noise ratios of no more than 1.2-1.3 dB. Nowadays the converters with much lower noise figure about 0.5-0.6 dB, are also available on the market. The purpose of this article is to analyze the impact of noise figure of LNBs on the reception of satellite signals on the basis of modelled data from the laboratory station.
Authors and Affiliations
Jacek Wilk-Jakubowski
Modelowanie konsystentnego termodynamicznie materiału sprężysto-plastycznego z uszkodzeniem
W artykule omówiono sposób formułowania relacji konstytutywnych materiałów sprężysto-plastycznych z uwzględnieniem uszkodzenia na podstawie dwóch potencjałów: potencjału energetycznego i potencjału dyssypacji. Uzyskany m...
Koncepcja stanowiska badawczego aplikacji pick and place
The paper presents the concept of a research station for vision systems algorithms of pick and place application. The position is based on a parallel delta robot. A spinning feeder has been proposed as a technical soluti...
Spożycie alkoholu przez kierującego pojazdem jako czynnik ryzyka w transporcie publicznym
Issues to do with driving vehicles after drinking alcohol as well as being in a state of intoxication have been the object of interest in units, institutions, organs of public administrations, which carry out actions to...
Systemy SRK– rejestracja danych eksploatacyjnych
The following article deals with the topic of Rail Traffic Control systems, focusing on the aspects of registration and acquisition of operational data. In the first part of the text, the authors focused on describing wh...
Minimalizacja zużycia elementów grupy tłokowo-cylindrowej
The article describes the problem associated with the piston-cylinder group and in particular issues minimizing the consumption of its individual parts such as a piston, piston rings and cylinder. Were presented methods...