Analysis of crack-tip plastic zone in a Compact Tensile Shear (CTS) Specimen
Journal Title: Frattura ed Integrità Strutturale - Year 2010, Vol 4, Issue 14
Abstract
The minimum plastic zone radius (MPZR) criterion is one of the recent criterions to estimate crack initiation direction under mixed mode loading. The MPZR theory is based on the theoretical computations of plastic zone size (PZS). In this investigation, the shape and size of crack-tip plastic zones have been estimated by analytical and the elastic finite element computations in a Compact Tensile Shear (CTS) specimen under mixed mode (I/II) loading according to von Mises yield criteria. The theoretical and the finite element analysis results are compared to analyze the minimum plastic zone radius (MPZR) criterion for crack-initiation angle with reference to the loading angle and stress intensity factor.
Authors and Affiliations
C. M. Sharanaprabhu, S. K. Kudari
Keywords
Related Articles
- EP ID EP145249
- DOI 10.3221/IGF-ESIS.14.03
- Views 75
- Downloads 0
Influence of control parameters on the crack paths in the aluminum alloy 2024 under bending
The paper presents development of crack paths in aluminium alloy 2024. Fatigue tests were carried out for specimens with rectangular cross-section. The specimens were put to bending at controlled energy param...
The strong formulation finite element method:stability and accuracy
The Strong Formulation Finite Element Method (SFEM) is a numerical solution technique forsolving arbitrarily shaped structural systems. This method uses a hybrid scheme given by the DifferentialQuadrature Method (D...
Three-dimensional effects on cracked discs and plates under nominal Mode III loading
The existence of three-dimensional effects at cracks has been known for many years, but understanding has been limited, and for some situations still is. Understanding improved when the existence of corner po...
Critical crack path assessments in failure investigations
This paper presents a case study in which identification of the controlling crack path was critical to identifying the root cause of the failure. The case involves the rupture of a 30-inch (0.76 m) natural gas pip...
Critical plane approach to multiaxial variable amplitude fatigue loading
A new critical plane approach based on the modified Manson-Coffin curve method (MMCCM) is presented in this paper for predicting fatigue lifetime under variable amplitude (VA) multiaxial fatigue loading. The crit...