Analysis of Damper Effect on Cable-Stayed Bridge Using Finite Element Simulation
Journal Title: Jurnal Kejuruteraan - Year 2015, Vol 27, Issue 1
Abstract
Cable-stayed bridges generally having common defects such as excessive vibration due to wind action, corrosion and fatigue occurred at the cables supporting member. This study presents two different approaches for the demonstration of the damping effect due to wind action on cable-stayed bridge. The fi rst approach uses a simplifi ed analysis method to study the reaction force at the cable end. A beam element was adopted for modelling the cables and a plate element for modelling the bridge’s deck. The second approach is based on the selected damper system applied at the cable end to determine the reaction response at the bridge models. Two methods are presented in this report with the consideration of bridge geometric effect. The effect of pretension of the cable and the exact treatment of cable sag with the cable weight is ignored. A numerical calculation has been carried out in determining the nominal transverse wind load, the nominal longitudinal wind load on deck and the nominal longitudinal wind load on cables in accordance to the current code of practice. The results generated from MIDAS Civil software have been used for comparing the analysis results. The stiffness coefficient for the selected rubber damper type was being modelled at the cable end to examine the effect of nominal and combined wind action at critical locations. The effectiveness of using the rubber damper to suppress the effects of wind was investigated through superposition of these rubber dampers at the maximum reactions at the cable end. It was found that the damper system adapted on the cable-stays has significant influence on suppressing the action due to wind.
Authors and Affiliations
Chai Mei Hwa, Siti Aminah Osman
Keywords
Related Articles
- EP ID EP417570
- DOI 10.17576/jkukm-2015-27-05
- Views 138
- Downloads 0
Sun Outage Calculator for Geostationary Orbit Satellites
Sun outages in satellite communication occur when the sun, a powerful broadband microwave noise source, passes directly behind the satellite (when viewed from Earth), causing the receiver with the beam directed towards t...
Biological Treatment of Pb and Zn Using Sequencing Batch Reactor
Effective wastewater treatment is essential to prevent water resources from being polluted. Usually, wastewater treatment can be divided into three distinct types; physical, chemical and biological treatment. This resear...
Polyaniline Composite Membranes Synthesis in Presence of Various Acid Dopants for Pressure Filtration
Polyaniline is a conductive polymer that is recently used as a material in producing a pressure filtration membrane. Polyaniline can be doped in various acids as dopants of different sizes and shapes to modify its inhere...
Kinect-Based Human Gait Recognition Using Locally Linear Embedded and Support Vector Machine
Recognition of human gait could be performed effectively provided that significant gait features are well extracted along with effective recognition process. Thus, the gait features should be selected or optimized approp...
Kejituan Datum Carta dalam Tempoh Cerapan Pasang Surut: Kajian Kes di Teluk Ewa, Pulau Langkawi (An Accuracy of Chart Datum in the Tidal Observation Period: Case Study for Teluk Ewa, Pulau Langkawi)
This study elaborates the precision of chart datum at Teluk Ewa, Langkawi Island. Observed tidal data for 19 years at Teluk Ewa tidal station were processed and analyzed using the “RMN Asean Australia Tidal Software” to...