Analysis of Three Phases Asynchronous Slip Ring Motor Performance Feedback Type 243
Journal Title: International Journal of Marine Engineering Innovation and Research - Year 2017, Vol 2, Issue 1
Abstract
Induction motor is an Alternating Current Electric Motor (AC), this motor most widely used. There are two types of rotor on three-phases asynchronous motor, the squirrel-cage rotor and the slip ring rotor. Every motor has its own characteristic, it have been affect the used of the motor. In this research is aiming to know three-phases asynchronous slip ring motor performance on unloaded and loaded condition. On its condition, the variation resistance starting from 0Ω - 25Ω. The results of three-phases asynchronous slip ring motor on unloaded condition having maximum output power 58 W and maximum torque 0.22 Nm in 25Ω of resistance. While in the condition loaded having a maximum Pin 131,5 W, maximum Pout 109,31 W, maximum torque 2,08 Nm and maximum efficiency 95%. The analysis was done by knowing the relation between torque vs speed and efficiency vs load. The result shows that the increasing of motor speed have been give affect the decreasing of motor torque in according with the torque formula. In the other result, it can be seen that increasing of the load, efficiency have been increase
Authors and Affiliations
Sardono Sarwito, Semin Semin, Achmad Suherman
Keywords
Related Articles
- EP ID EP247655
- DOI 10.12962/j25481479.v2i1.2517
- Views 242
- Downloads 0
Evacuation Analysis of 1200 GT Passenger Ship in Case of Fire using Agent-Based Modeling Approach
This study discusses about safety on board especially during fire condition. During fire, all passengers and crew had to beevacuated into safe place. The study observe at 1200 GT passenger ships, a typical ship which hav...
Design of Automatic Transfer Switch ACOS with Human Machine Interface Monitoring System in Shipboard Application
This paper concern about design ACOS with PLC system. The supply of electricity will move from the main generator to the battery when the main generator lost one phase, and the power supply will switch to the emergency g...
Validation of Engine Performance for Tests on Ballast Water Heat Treatment Using Engine Waste Heat
Heat treatment has been considered as a suitable option for treatment of ballast water. Utilizing the waste heat from the diesel engine fresh water and exhaust gases would be an economic option. For recovering the heat f...
Decision Making of Full Speed, Slow Steaming, Extra Slow Steaming and Super Slow Steaming using TOPSIS
Many shipping companies were trying to deliver their cargoes as quickly and reliably as possible. But in the beginning of the latest economic crisis on 2007, the containership fleet is slowing down. Even though world oil...
Analysis and Optimation Hydrofoil Supported Catamaran (HYSUCAT) Size 25 Meter based on CFD Method
In the field of transportation, ship is relatively cheap then others transportation. However, the ship still has constraints on speed and fuel consumption. Therefore, the ship has many variations of shape to achieve opti...