Application of time-series analysis in foundry production
Journal Title: Archiwum Odlewnictwa - Year 2009, Vol 9, Issue 3
Abstract
Characterization of the time-series analysis is presented, as a data mining tool which facilitates better understanding nature of manufacturing process and permits forecasting of future values of the process parameters or production results on the basis of the past data, recorded in regular intervals. The main methods and problems of the time-series analysis are presented, related to the trend function, evaluation of seasonality and significance of the information contents in the residual values. The authors’ research results, related to exemplary production data collected in a foundry with Disamatic molding line (temperature of the molding sand), are presented. It is concluded that a properly performed analysis of time-series can be a useful tool for analysis and predictions of foundry production process.
Authors and Affiliations
M. Perzyk, K. Krawiec, J. Kozłowski
Keywords
Related Articles
- EP ID EP72017
- DOI -
- Views 121
- Downloads 0
Evolution of Mg-5Al-0.4Mn microstructure after rare earth elements addition
Mg-5Al-0.4Mn-xRE (x = 0, 1, 2, 3 wt.%) magnesium alloys were prepared successfully by casting method. The microstructure was investigated by light microscopy. The influence of rare earth (RE) elements on the area fractio...
Damping Properties vs. Structure Fineness of the High-zinc Aluminum Alloys
The subject of this study is the presentation of relation between the degree of structure fineness and ultrasonic wave damping coefficient for the high-zinc aluminium alloys represented in this study by the sand mould ca...
Effect of additions of Cr, Mo, W and/or Si on the technological properties of aluminum-iron-nickel bronze
The aim of this study was to investigate the effect of additives of Cr, Mo, W and / or Si CuAl10Fe5Ni5 bronze, cast into sand moulds, the bronze technological properties such as: porosity, volumetric shrinkage Sv, linear...
Thermal aspects of temperature transformations in silica sand
Problems related with the choice of moulding sand composition considering its behaviour in contact with molten metal were discussed. The investigations of high-temperature phenomena enable moulding sand composition to be...
Calorimetric examination of mixtures for modification of nickel and cobalt superalloys
The study presents the results of thermodynamic calculations and calorimetric examination of thermal reactions taking place at high temperatures between the nanoparticle inoculants and metallic constituents of nickel and...