Artificial UV light influence on the colour of chemically modified and thermo - mechanically processed oak (Quercus robur L.) and locust wood (Robinia pseudoacacia L.)
Journal Title: Annals of WULS, Forestry and Wood Technology; Zeszyty naukowe SGGW - Year 2016, Vol 95, Issue 1
Abstract
Artificial UV light influence on the colour of chemically modified and thermo - mechanically processed oak wood (Quercus robur L.) and locust wood (Robinia pseudoacacia L.). The oak and locust wood was treated with ammonia gas. After the chemical modification, the material under study was subject to thermo - mechanical processing. The influence of artificial UV light on the colour of wood was analysed. Wood colour parameters were specified with the use of the mathematical colour space model CIE L*a*b*. It was observed that before irradiation the lightness of oak wood chemically modified in ammonia was greater than the lightness of locust by 30%. Oak wood, both chemically modified and after thermo - mechanical processing, was less susceptible to changes in lightness caused by UV light than locust wood. Depending on the time of UV irradiation, the total change in colour of densified oak wood amounted to 0.8 - 1.9 of the total colour change of oak modified in ammonia. In turn, the total colour change of densified locust wood was 2.0 - 2.7 times smaller than the total colour change of locust wood modified in ammonia. Keywords:
Authors and Affiliations
AGNIESZKA LASKOWSKA, ANDRZEJ MAZUREK, MAREK GRZEŚKIEWICZ
Keywords
Related Articles
- EP ID EP361736
- DOI -
- Views 79
- Downloads 0
Ion implantation changes of tribological and corrosion resistance properties of materials used in wood industry
Ion implantation changes of tribological and corrosion resistance properties of materials used in wood industry. The paper presents basic information about ion implantation technique as regards its real and potential app...
Werkstoffe aus Holzspänen, Rohstoffe und Technologien der Herstellung nach Harßdörffer [1651], Rohr [1732] Zedler [1735], Krünitz [1784], Jöcheres [1821], Poppe [1837], Klauditz [1967]
Werkstoffe aus Holzspänen, Rohstoffe, und Technologien der Herstellung nach Harßdörffer [1651], Rohr [1732] Zedler [1735], Krünitz [1784], Jöcheres [1821], Poppe [1837], Klauditz [1967]. Im Nachfolgenden haben die Autore...
The use of glass and aramid fibres for the strengthening of timber structures
The use of glass and aramid fibres for the strengthening of timber structures.The paper presents exemplary options and effectiveness of timber structure strengthening with GFRP and AFRP.The results of selected investigat...
Bestimmung der Kantenschartigkeit der Holzwerkstoffplatten im Schneideverfahren
Bestimmung der Kantenschartigkeit der Holzwerkstoffplatten im Schneideverfahren. Die vorliegende Arbeit bietet die Möglichkeit eines Vergleichs derKantenschartigkeit der Holzwerkstoffplatten im Schneideverfahren in Bezug...
Timber-concrete composite floor under fire conditions – comparative analysis
Timber-concrete composite floor under fire conditions – comparative analysis.This article presents the results of a calculative analysis of a defined timber-concrete composite floor designed at ULS and SLS states conditi...