AUTOMATED SELECTION OF ANALYTICALLY CALCULATED GEARBOX CONCEPTS ACCORDING TO DIMENSIONAL CRITERIA
Journal Title: Mobility and Vehicle Mechanics - Year 2019, Vol 45, Issue 1
Abstract
This research allows for a selection of gearbox according to minimal dimensional criteria from automated analytical calculations. An automation of the calculation process for four different analytical approaches from literature. The results achieved in the software are compared according to various criteria, minimal length, height, width, and volume. The automation of the process allows for a selection of gearbox concept depending on the chosen criteria. For specific input values, a verification of the automated software operation was conducted, and the resulting values are compared and discussed. Differences in calculated volumes of gearboxes, depending on choice of calculation, reach over 50%. This approach allows for adequate choice of gearbox for specific cases and speeds up the calculation process.
Authors and Affiliations
Keywords
Related Articles
- EP ID EP591823
- DOI 10.24874/mvm.2019.45.01.03
- Views 103
- Downloads 0
A PRELIMINARY ASSESSMENT OF RESIDENTIAL APPLICATION OF INTERNAL COMBUSTION ENGINE BASED COGENERATION IN SERBIAN CLIMATIC CONDITIONS WITH BUILDING SIMULATION PROGRAM
In this paper the energetic and economic performance assessment of residential application of IC engine based cogeneration system in the Serbian climatic conditions using building energy simulation software was performed...
NUMERICAL ANALYSIS OF THE CHILD LUMBAR SPINE MOVEMENTS IN THE MOTOR VEHICLE CRASH
Seat belts in vehicles, for many years, have the task to reduce the level of injuries that can occur during traffic accidents. Although the number of children who die in traffic accidents decreasing, there are still some...
RESEARCH THE INFLUENCE OF SPARK PLUGS TYPES ON THE PERFORMANCE OF THE ENGINE OPERATING ON GASEOUS FUELS
Topical issue in recent years is the search for methods of reducing fuel consumption and improve environmental performance of internal combustion engines. In spark-ignition engines great importance is the type of ignitio...
EXPERIENCE OF DIESEL ENGINES CONVERSION FOR OPERATION ON NATURAL GAS OBTAINED IN MADI
Analysis of different methods of diesel engines conversion for operation on natural gas was carried out showing feasibility of these methods for engines of various applications. The KAMAZ V8 120/120 mm diesel engine was...
THE DEVELOPMENT OF MAGNETIC GEARS FOR TRANSPORTATION APPLICATIONS
The gears, where the power and torque transmissions are performed with no contact and with help of the magnetic forces, are called magnetic gears. With this gears, unlike the mechanical gear transmissions, there are no n...