Behaviors of Associated Arc and Its Influences on Sliding Current Carrying Friction
Journal Title: 河南科技大学学报（自然科学版） - Year 2018, Vol 39, Issue 5
Abstract
In order to solve the problem that the great impact of associated arc on the current-carrying friction process was difficult to evaluate, the behavior of single associated arc and its impact on the current-carrying friction were studied on a current-carrying frictional probe/plate couples.The results show that the current decreases overall during the process of initiation, development and extinction of the single associated arc.The current is divided into five stages according to the rate of decline, while the change of the voltage is opposite.The average current-carrying efficiency at various stages is not high with the value of 38%42%, and it increases slightly with increase of current.The friction surface is badly damaged by single associated arc, especially the front of ablation region.Moreover, the damage is aggravated with the increase of the current.Thus, the arc is harmful to current-carrying property and friction wear property.
Authors and Affiliations
Zhenghai YANG, Lianmei SONG, Honghui CHANG, Yongzhen ZHANG
Keywords
Related Articles
- EP ID EP468417
- DOI -
- Views 68
- Downloads 0
Energy Management Strategy of Fuel Cell and Storage Battery Hybrid Electric Tractor
In view of the problem of insufficient driving mileage of pure electric tractor, the output performance of fuel cell and storage battery was analyzed. The structural and power flow of the fuel cell/storage battery hybrid...
Effect of Rib Stiffness on Stability of Ring-stiffened Functionally Graded Cylindrical Shells with Rib Eccentricity
Based on the Donnell thin shells theory, considering the influence of rib eccentricity, the stability equation of ring-stiffened functionally graded cylindrical shells under hydrostatic pressure was derived by using ener...
Effect of Different Holding Time on Tribological Properties of AT13 Coating
Plasma spraying technology was utilized to deposit Al2 O3-Ti O2 coatings on 20 steel samples. The prepared coating was heat-treated at 500 ℃ for 1 h, 3 h and 5 h. The friction and wear performance of coatings were tested...
Safety Analysis of Abutment Local Underpinning Under Complex Terrain Conditions
For the railway expansion construction project,existing pedestrian bridge was stabilized through unsymmetrical piles framework,which was local underpinning and anti-slide to ensure safety and stability. A three-dimension...
Experimental of Mechanical Effect Weakening of Acid-contaminated Red Clay in Guilin
The representative red clay in Yanshan area of Guilin was selected as the test soil sample, and hydrochloric acid was used as the acid pollutant to prepare 3 different concentrations of acid solution. The hydrochloric ac...