Boson peak and nanostructure of chalcogenide glass-like semiconductors
Journal Title: JOURNAL OF ADVANCES IN PHYSICS - Year 0, Vol 6, Issue 3
Abstract
The structural features of As2Se3, As40Se30S30, As40Se30Te30, As33.3Se33.3S33.4, As33.3Se33.3Te33.4 chalcogenide glasses have been studied by Raman spectroscopy in low-energy region. The results are explained in view of nanostructure of samples, i.e. by presence of heterogeneity in samples at the nanometer scale and with change their size depending on the modification of the chemical composition.
Authors and Affiliations
Alekberov R. I
Keywords
Related Articles
- EP ID EP653584
- DOI 10.24297/jap.v6i3.6959
- Views 72
- Downloads 0
Estimation of monthly global solar radiation in Buenos Aires: preliminary analysis
Six existing models and one proposed approach for estimating global solar radiation were tested in Buenos Aires using commonly measured meteorological data as temperature and sunshine hours covering the years 2010-2013....
Complex Impedance Measurements on the Steady State Behaviors of a 10-cell PEFC Stack
Experimental studies on the behavior of a Polymer Electrolyte Fuel Cell (PEFC) stack were conducted by performing complex impedance measurements. Initially, the steady state characteristics of a 10-cell stack were measur...
Avoiding the Brain Damage
The pursuit of low losses and low distortion are necessary conditions to improve the signal integrity. As mentioned in [1], it is sometimes said that thereare two types of engineers” those who have signal integrityproble...
PREPARATION, DIELECTRIC AND OPTICAL PROPERTIES OF Cr2O3 /PVC NANOCOMPOSITE FILMS
Chromium oxide (Cr2O3) nanoparticles were synthesized using a sol-gel method and mixed with polyvinyl chloride (PVC). Rietveld refinement of X-ray powder diffraction (XRD) patterns of the samples revealed that the crysta...
Indentation Creep and Microstructure Properties of Sn-Ag Solder Alloys
The microstructure and micro-hardness of Sn-3.5wt.5%Ag, Sn-3.5wt.%Ag-0.27wt.%Ti and Sn-3.5wt.%Ag-0.27wt.%Cd treated at 75, 100, 125 and 150oC were studied. The microstructure characteristics of the tested alloys had been...