Calculation of the stability of the inter-saw gasket under compression
Journal Title: Modern Innovations, Systems and Technologies - Year 2022, Vol 2, Issue 4
Abstract
The article presents the results of calculating the stability of the inter-saw gasket under compression for a 5LP linter machine. An increase in the value of the number of half-waves for steel St3 (n=0.4672) from aluminum AK5M2 (n=0.3276) by 42.6% and the critical compressive force (for st.3 - Тcr=2263.4 MPa and for AK5M2 - Тcr=1642.3 MPa) by 37.8% has been found out. The results of calculations of the stability of inter-saw gasket made of steel St. 3 and aluminum AK5M2 showed the possibility of using a steel inter-saw gasket when assembling the saw cylinders of the 5LP linter machine.
Authors and Affiliations
D. M. Mukhammadiev, F. Kh. Ibragimov, O. Kh. Abzoirov, L. Yu. Zhamolova
Keywords
Related Articles
- EP ID EP710420
- DOI 10.47813/2782-2818-2022-2-4-0301-0311
- Views 84
- Downloads 0
Underwater optical wireless communication as a means of improving the efficiency of information and telecommunication support for deep-sea research
Sonar, radio frequency and optical wave systems are technologies that are used today to carry out underwater wireless communication. However, due to the need to deliver a large number of video images from autonomous unin...
Analysis of the process of manufacturing clothing with a stable shape from wool non-woven material using feling technique
This article discusses the properties of wool fibers, the processes of their softening and the composition of substances used as an aid in this process. A comparison was made of the properties of fibers when mixed with d...
Protection of speech information in scientific organizations against leakage through technical channels
The protection of speech information from leakage through technical channels is a crucial concern in today's digital age. With the increasing reliance on technology and the internet for communication, ensuring the confid...
Investigation of the unevenness of the linear density of the thread and the choice of individual indicators of the quality of the thread
The article gives questions about improving the quality of yarn and reducing its discontinuity, which are closely related to the unevenness of semi-finished products that occur during their extraction. It is explained by...
Development of information technologies in the tourism sector
The development of foreign and Russian tourist information centers is characterized. The extensive expansion of the network of Russian centers, the diversity of their activities, the accumulation of a number of unresolve...