CALCULATION OF WIDTH MINIMUM TROUGH ON THE EQUILATERAL SWITCH AT POINT HEEL LENGTH IS MORE THAN THE SIZE OF VALVE LEAF IN THE RAILROAD SWITCH
Journal Title: Збірник наукових праць Українського державного університету залізничного транспорту - Year 2019, Vol 183, Issue 183
Abstract
In educational and reference literature very briefly presents data on the methodological calculations and design features of symmetric switches for different operational conditions, including for the mainline and industrial transport. This article summarizes some of the developments to remedy this drawback of textbooks. Equilateral switch is switch with all elements are arranged symmetrically relative to the axis of the main path. Equilateral switches are widely used in marshalling-yard bays stations, because they work in cramped conditions. Equilateral switch sometimes used when it is necessary to achieve higher speeds on both side of the track. For example, the symmetric transfer switch type R65 frog number 1/11 of the speed limit in the lateral direction 1,75 times greater than for an ordinary switch of the same brand and type. Equilateral switch or applied straight, or with curved blades. Straight tongue to main station track of industrial transport. On the main paths in symmetric switches used curved tongues. At design of symmetric railroad switches the condition of easy access of a crest of a wheel without pressing with a non-working part of a crest on a non-working side of the taken-away funnyman in a zone of the minimum trench between the funnyman and a frame rail and also in the funnyman's root has to be provided. To provide impossibility of pressing of wheels the size of the minimum trench between the taken-away funnyman and a frame rail has to be not less than 71 mm. The traffic safety of trains in a zone of the taken-away funnymen of symmetric railroad switches depends on the rational sizes of trenches between frame rails and the taken-away funnymen. The design of symmetric turnouts is significantly different from the design of conventional one-way translations. In this regard, special attention should be paid to the issues of the relative position of the laid wings and frame rails and the determination of the size of the gutters between them.
Authors and Affiliations
Olena Oliinyk, Olha Soroka
Keywords
Related Articles
- EP ID EP656917
- DOI -
- Views 57
- Downloads 0
FEATURES OF DIAGNOSTIC CHARACTER APPEARANCE REGARDING THE TECHNICAL CONDITIONS OF REDUCTION GEAR FOR PASSENGER CAR
The article to determine the technical condition of reduction gear passenger wagons the mathematical model of vibration that allows to detect the early stages of the birth defects. Using a mathematical model for the cont...
MODEL OF MUTUALLY DEPENDENT TRANSPORT FLOWS TRAFIC CONTROL ON INDUSTRIAL RAILWAY TRANSPORT
Issues related to the optimal control of interdependent traffic flows during the dispatching centralization of industrial railway transport facilities are investigated. The problem of the intellectual and analytical supp...
IMPROVING THE TECHNOLOGY OF PROCESSING PASSENGER TRAINS IN THE CONDITIONS OF FUNCTIONING OF SPEED MOVEMENT
Reducing the time of passengers' stay in the road and the possibility of regulating the time of departure and arrival of the train decides the introduction of high-speed passenger traffic on the railways of Ukraine. This...
STEEL-GLUED WITHOUT ANCHOR JOINT SHORT-TERM STRENGTH EXPERIMENTAL RESERCH ON ACRYLIC MODIFIED COMPOSITIONS
The central issue of the paper is the short-term adhesive strength dependence determining from the number of various technological factors and advanced acrylic composition selection for further elements constructions and...
FINITE ELEMENT ANALYSIS OF THE STRESS AND STRAIN STATE OF THE NODE OF THE TOP BELT OF THE STEEL AND CONCRETE COMPOSITE CABLE SPACE FRAME
The article presents a design and numerical research of a node connection of spatial modules of the steel and concrete composite cable space frame in top chord. As a result of the research, an effective and simple constr...