Comparative analysis of various asymmetrical configurations of cascaded H-Bridge multilevel converter
Journal Title: IOSR Journals (IOSR Journal of Electrical and Electronics Engineering) - Year 2017, Vol 12, Issue 5
Abstract
The main objective of asymmetrical multilevel converter configuration is to achieve quality form of AC voltage and current by increasing the levels of output voltage. This paper mainly investigate the pro’s and cod’s of various dc source progression schemes like binary, quasi, trinary, etc proposed for the asymmetrical cascaded H bridge multilevel converter topologies. The performance of a 3φ, 400V cascaded Three H Bridge multilevel converter has been examined for various asymmetrical dc source progression schemes using MATLAB/Simulink and also prototype converter has been validated using dSPACE DS1103 real time interface controller.
Authors and Affiliations
B. Kunjithapatham, T. S. Anandhi
Keywords
Related Articles
- EP ID EP388373
- DOI 10.9790/1676-1205023550.
- Views 167
- Downloads 0
Implementation of a Novel Pwm Dc-Dc Converter
This paper presents the implementation of a soft-switching boost dc-dc converter. Passive softswitching is employed due to its advantages over the active soft-switching and its ability to reduce switching losses. A Lapla...
A Review of Chemical effects of Nanoparticles to Human and Environment
Science and technology have identified unique properties of nanomaterials. These properties may yield many far-reaching societal benefits, but they can also pose hazards and risks. Although the nanotechnology industry is...
Design and Development of Microcontroller Based Wireless Humidity Monitor
The wireless humidity monitor is widely used in several research laboratories, hospital’s store, industries for research, treatment and diagnosis of the patients, production, storing food and beverage etc. The aim of thi...
Heuristic Approach to DG Sizing and Siting in Distribution System for Voltage Drop Reduction
This paper presents the impact of penetration level and power factor of DG on the voltage drop in a distribution system. For this purpose, suitable expressions have been developed to estimate the squared voltage drop red...
Solar Home Lighting System with AC and DC Loads
The main objective of the study is to provide alternate lightning system by using solar energy. The system taken for study consists of a Solar panel of 10W, a 12 V battery, a Solar charge controller, Multi vibrator IC(CD...