Implementation of a Novel Pwm Dc-Dc Converter
Journal Title: IOSR Journals (IOSR Journal of Electrical and Electronics Engineering) - Year 2018, Vol 13, Issue 3
Abstract
This paper presents the implementation of a soft-switching boost dc-dc converter. Passive softswitching is employed due to its advantages over the active soft-switching and its ability to reduce switching losses. A Laplace transform-based analysis of the converter circuit was carried out to obtain design information which was already published. A complete circuit of the soft switching PWM dc-dc converter prototype is also presented here. Experimental results obtained from the prototype agree closely with the predicted results and this demonstrates the feasibility of the system.
Authors and Affiliations
A. E. Anyalebechi
Keywords
Related Articles
- EP ID EP388745
- DOI 10.9790/1676-1303020108.
- Views 169
- Downloads 0
Shunt Active Power Filter for Remove Harmonics Using Conventional PI and Fuzzy Logic Controllers
The widespread use of power electronics devices such as inverter, rectifier, and so on. in power systems causes severe problems linked to power quality. The widespread use of nonlinear single-phase power electronic devic...
Design of A Low Power Dissipation Bandgap Voltage Reference Without Resistors
With the development of portable electronics, low power dissipation have become the main direction of current chip research, because Bandgap Reference (BGR) circuits are widely used in modern LSIs to generate a reference...
Analysis of Nigeria Power System Voltage Collapse Incidences From 2000 To 2017
The growth of any country depends on how effective their power sector is. Voltage collapse eventually leads to system blackout and this is a major concern for every day power system operations. The Nigeria National Grid...
The Development of a test bed to support the Design of Diagnostics and Prognostics Applications of a complex system
This paper presents the development of test bed to support diagnostics and prognostics applications as to enhance precision in component or subsystem. The development of this test bed is divided into three parts: the har...
Development of a Wavelet-ANFIS based fault location system for underground power cables
In the past decade, electricity demand has increased rapidly in metropolitan areas. All over the world, large scale underground power cable installations networks are replacing overhead transmission lines due to environm...