Comparative performance with different versions of low heat rejection combustion chambers with crude rice bran oil
Journal Title: Archive of Mechanical Engineering - Year 2014, Vol 0, Issue 4
Abstract
It has been found that the vegetable oils are promising substitute, because of their properties are similar to those of diesel fuel and they are renewable and can be easily produced. However, drawbacks associated with crude vegetable oils are high viscosity, low volatility call for low heat rejection combustion chamber, with its significance characteristics of higher operating temperature, maximum heat release, and ability to handle lower calorific value (CV) fuel etc. Experiments were carried out to evaluate the performance of an engine consisting of different low heat rejection (LHR) combustion chambers such as ceramic coated cylinder head-LHR-1, air gap insulated piston with superni (an alloy of nickel) crown and air gap insulated liner with superni insert – LHR-2; and ceramic coated cylinder head, air gap insulated piston and air gap insulated liner – LHR-3 with normal temperature condition of crude rice bran oil (CRBO) with varied injector opening pressure. Performance parameters (brake thermal efficiency, brake specific energy consumption, exhaust gas temperature, coolant load, and volumetric efficiency) and exhaust emissions [smoke levels and oxides of nitrogen [NOx]] were determined at various values of brake mean effective pressure of the engine. Combustion characteristics [peak pressure, time of occurrence of peak pressure, maximum rate of pressure rise] were determined at full load operation of the engine. Conventional engine (CE) showed compatible performance and LHR combustion chambers showed improved performance at recommended injection timing of 27 degrees bTDC and recommend injector opening pressure of 190 bar with CRBO operation, when compared with CE with pure diesel operation. Peak brake thermal efficiency increased relatively by 7%, brake specific energy consumption at full load operation decreased relatively by 3.5%, smoke levels at full load decreased relatively by 11% and NOx levels increased relatively by 58% with LHR-3 combustion chamber with CRBO at an injector opening pressure of 190 bar when compared with pure diesel operation on CE.
Authors and Affiliations
M. V. S. Murali Krishna, N. Durga Prasada Rao, B. Anjaneya Prasad, P. V. K. Murthy
Keywords
Related Articles
- EP ID EP166895
- DOI 10.2478/meceng-2014-0036
- Views 123
- Downloads 0
Effect of tool geometry and welding speed on mechanical properties and microstructure of friction stir welded joints of aluminium alloys AA6082-T6
Friction stir welding is a solid state innovative joining technique, widely being used for joining aluminium alloys in aerospace, marine automotive and many other applications of commercial importance. The welding parame...
Finite Element formulation for the large-amplitude vibrations of FG beams
On the basis of Euler-Bernoulli beam theory, the large-amplitude free vibration analysis of functionally graded beams is investigated by means of a finite element formulation. The von Karman type nonlinear strain-displac...
Robin Heart surgery robotic system. Challenges in mechanical construction, control system and stuff training before first clinical application
The last decades, when robots have appeared in the operating room, showed the possibility of surgery enhancement by improving precision, repeatability, stability and dexterity. However, taking into consideration still ex...
Application of the strip yield model to crack growth predictions for structural steel
A strip yield model implementation by the present authors is applied to predict fatigue crack growth observed in structural steel specimens under various constant and variable amplitude loading conditions. Attention is p...
Real-time human in the loop MBS simulation in the Fraunhofer robot-based driving simulator
The paper encompasses the overview of hardware architecture and the systems characteristics of the Fraunhofer driving simulator. First, the requirements of the real-time model and the real-time calculation hardware are d...