Copolymerization of ethylene with α-olefins over highly active supported Ziegler-Natta catalyst with vanadium active component
Journal Title: Polyolefins Journal - Year 2019, Vol 6, Issue 2
Abstract
The new highly active supported vanadium-magnesium catalyst (VMC) has been studied in α-olefin (1-butene, 1-hexene)/ ethylene copolymerization in the presence of hydrogen. Data on the effect of α-olefin/ethylene ratio in copolymerization on the content of branchings in copolymers, kinetic profile, copolymer yield, molecular weight and molecular weight distribution of copolymers have been obtained. It was found that both α-olefins are effective chain transfer agents in the ethylene-α-olefins copolymerization. The copolymerization ability of VMC is much higher than that of the well known titanium-magnesium catalysts. It was found that the use of optimal conditions of ethylene/α-olefin polymerization on the VMC catalyst makes it possible to obtain copolymers with a high yield (10-16 kg gcat-1 cat for 2 h) the copolymers having broad and bimodal MWD. Data on the branchings distribution in copolymers prepared with VMC catalyst have been obtained via fractionation of copolymers on the fractions with narrow polydispersity (Mw/Mn ≈ 2). Quite a uniform distribution of branchings over fractions with different molecular weight was found in distinction to inhomogeneous distribution of branchings in copolymers produced over the well known supported titaniu-magnesium catalyst.
Authors and Affiliations
Zenghui Zhao, Tatiana B. Mikenas, Vladimir Aleksandrovich Zakharov, Marina I. Nikolaeva, Mikhail A. Matsko, Elena Bessudnova, Wei Wu
Mathematical modeling the effect of catalyst initial shape and the crack pattern in olefin copolymerization
A two-dimensional (2D) single particle model for the copolymerization of propylene-ethylene with heterogeneous Ziegler-Natta catalyst is developed. The model accounts for the effects of the initial shape of the catalyst...
Dissymmetric dinuclear transition metal complexes as dual site catalysts for the polymerization of ethylene
A series of dissymmetric dinuclear complexes were synthesized, as dual site catalysts in ethylene polymerization, by coupling the allylated a-diimine complexes of the metals Ti, Zr, V, Ni and Pd with the ansa-zirconocene...
Polymerization of sterically hindered a-olefins with singlesite group 4 metal catalyst precursors
A variety of group 4 metal catalytic systems (C2-symmetric {EBTHI}-, {SBI}-type zirconocene complexes (C2-1–4); C1-symmetric (C1-5–8) and Cs-symmetric (Cs-9) {Cp/Flu}-type zirconocene complexes; Cp*2ZrCl2 (Cp* 2-10)), ha...
Preparation and characterization of a bionanopolymer film for walnut packaging
To apply the nanomaterial as a component in the packaging material structure, in this research, the carboxymethyl cellulose (CMC)/polyvinyl alcohol (PVA) film were prepared with three levels of nanoclay particles (0.5, 1...
Compatibilization of polycarbonate/poly (ethyleneterephthalate) blends by addition of their transesterifcation product
In this study, poly carbonate (PC) and poly (ethylene terephthalate) (PET) were reactive melt-blended under two different conditions to produce PC/PET copolymers. For each condition, samples were taken at specifed mixing...