Deformation Effect Analysis of Shield Tunnel Closely Side-passing Viaduct Pile Foundation
Journal Title: Urban Mass Transit - Year 2024, Vol 27, Issue 9
Abstract
Objective Shield tunneling may cause displacement and deformation of the nearby viaduct foundation and reduce its bearing capacity. Therefore, the deformation effect caused by shield tunnel closely side-passing viaduct foundation is studied based on an actual project. Method Relying on the project of Hefei Metro Line 5 in which the shield tunnel passes the pile foundation of the viaduct on the side, a three-dimensional numerical model is established to analyze the horizontal displacement,the longitudinal displacement and the settlement pattern of the pile foundation caused by shield construction. Result & Conclusion The research results show that the horizontal displacement at the pile bottom presents dynamic changes of leaving, approaching and leaving the tunnel. The horizontal displacement of the pile body is similar to a C shape flexture curve. The displacement increases first and then decreases along with the pile depths, and the extreme value is located at the pile depth of 9~10 m. The longitudinal displacement at the pile bottom （parallel to the tunnel axis） shows a bimodal curve. After the shield passing the pile foundation, the pile body undergoes longitudinal deformation in the opposite direction of the excavation. After the shield passing through the pile foundation for 12m and further, the horizontal displacement of the pile body in longitudinal direction rebounds, indicating that the influence of shield tunneling on the longitudinal deformation of the pile foundation is reversible to a certain extent. The settlement of the pile foundation presents a steep trend. The closer the pile foundation at the same side is to the tunnel, the greater the settlement. Moreover, the excavation of the far side tunnel will cause secondary settlement of the pile top. The maximum settlement occurs at the bottom of the No.4 pile foundation, and the settlement value is 4.94 mm.
Authors and Affiliations
Fenghai MA, Qi WANG, Pan YAN
Keywords
Related Articles
- EP ID EP744318
- DOI 10.16037/j.1007-869x.2024.09.010
- Views 22
- Downloads 0
Turnout Design of Same-side Curved Track for Straddle Tourism Monorail
Objective The tourism rail project at a scenic area is a single-line route. To enhance tourists transportation efficiency, it is required to arrange two sets of single-opening curved track turnout symmetrically within th...
Research on Accessibility Evaluation Method for Urban Rail Transit Station Based on Shared Bicycle Connection
[Objective] The shared bicycle is an effective connection tool for urban rail transit station. It is necessary to establish an accessibility measurement model to evaluate the accessibility of urban rail transit stations...
Influence of Shield Launching and Receiving on Working Shaft Retaining Structure
[Objective] Generally, shield machines are launched or received after completing the construction of shield working shaft main structure. However, due to various constraints, considering SLR (shield launching and receivi...
Flexible Process Design for Urban Rail Transit Vehicle Overhaul
[Objective] Overhaul operations for urban rail transit vehicles pose challenges and bottlenecks in the organization of maintenance work. Currently, there is a lack of systematic exploration of the overhaul contents and p...
Settlement Control Techniques for Urban Rail Transit Station Entry/Exit Large Profile Pipe Jacking Engineering through Urban Roads
Objective To ensure the smooth implementation of urban rail transit station entry/exit pipe jacking construction project, it is essential to study the impact of ground settlement and explore settlement control measures f...