DEGREE OF ISOTROPY SURFACE STRUCTURE OF MACHINE ELEMENTS AND WEAR PROCESS
Journal Title: Tribologia - Year 2012, Vol 246, Issue 6
Abstract
In this paper, the influence of figuration of surface geometric structure on the run of wear processes of frictional pairs is discussed. Arrangement of the traces of machining determined the structure degree of isotropy. The paper discusses the characteristics of surface layers with particular emphasis on surface structure isotropy. The results of experimental investigations were carried out on a test stand designed and made for the research. As the measures of wear processes, one accepted the following quantities: mass decrement of samples and changes of roughness parameters Ra. The results of experimental investigations registered for the different degrees of isotropy of structures and thus traces of machining. The investigations confirm the influence of the tested factor on the intensity of the wear process.
Authors and Affiliations
Maciej Matuszewski, Janusz Musiał, Michał Styp-Rekowski
Keywords
Related Articles
- EP ID EP270012
- DOI -
- Views 63
- Downloads 0
TRIBOLOGICAL PROPERTIES OF SELECTED IONIC LIQUIDS IN THE MATERIAL PAIRS: STEEL–PA6 AND STEEL–PMMA
Ionic liquids are one of novel substances used as bases of lubricating oils or as additives. They are among so called “green chemistry” group of substances. Melting point of ionic liquids occurs at room temperatures. Aut...
MODELING THE THERMAL PHENOMENA IN THE FRICTION PROCESS OF THE SLIDING BEARING
Thermal imaging tests allow for precise location of improperly operating elements of machines and devices. This is particularly important in elements of bearing systems where relative rotational movement causes the relea...
THE INFLUENCE OF E-BEAM RADIATION ON PLASTIC DEFORMATION, MECHANICAL PROPERTIES AND WEAR OF THE POLYETHYLENE GUR 1050 FOR ACETABULAR CUPS
The resistance of polyethylene to wear and permanent deformation influences the durability of polymer-metal kinematic systems. The recently introduced polyethylene, GUR 1050, of a molecular weight of 9.2 • 106 g/mole is...
Wpływ wymuszeń mechanicznych na kształtowanie właściwości fizykochemicznych smarów plastycznych
W publikacji przedstawiono wyniki badania wpływu wymuszeń mechanicznych na stabilność mechaniczną i termiczną smarów plastycznych. Badane kompozycje smarowe otrzymano dyspergując w syntetycznym oleju estrowym i oleju min...
Właściwości tribolgiczne warstwy wierzchniej z borem w warunkach tarcia ślizgowego
Właściwości tribologiczne par ciernych zależą od ich konstrukcji, zastosowanych materiałów i przeprowadzonej obróbki powierzchniowej elementów pary. Celem badań było wyznaczenie wpływu modyfikacji warstwy powierzchniowej...