DESIGN AND DYNAMIC CONTROL OF PRODUCTION LINE AT TEKNIK BALANS COMPANY
Journal Title: Endüstri Mühendisliği - Year 2016, Vol 27, Issue 4
Abstract
The purpose of the study is designing a production line that can produce four different models of balancing machines to keep with the increasing customer demand. To be able to fully understand the company’s operational processes, observations and analyses have been made, detailed time study has been performed for operation descriptions and processing times of the products. In order to determine the area where the line will be located, a new layout has been generated by observing relations between consecutive operations and confirmed by the company. For determining the number of stations and balancing the line, mathematical models have been generated. First, the problem was solved by a heuristic method and then optimization software was used to solve the mathematical models optimally and results between two solutions were proved to be similar. Applicability of the method in real life was tested by a simulation model. For the line to function efficiently, best product sequencing is generated. Through a decision support system, best daily production plan was obtained and maximum throughput was reached with the minimum cycle time.
Authors and Affiliations
Ayşe DOĞAN, Ayşe Melis GÖKKAN, Ceren YENİ, Aslıgül BÖRÜHAN, Yazgül YURĞUN, Murat FADILOĞLU, Sinem ÖZKAN
Keywords
Related Articles
- EP ID EP631305
- DOI -
- Views 50
- Downloads 0
BIOMASS LOGISTICS MANAGEMENT FOR BIOGAS POWER PRODUCTION FACILITY
The biogas power plant, which generates energy from biomass, uses animal waste to reach its energy production target, and it hasstarted to collaborate with about 150 farms within the area. In this project, the amount of...
CLOSED LOOP SUPPLY CHAIN NETWORK DESIGN PROBLEM
In this study, we address the closed loop supply chain network design problem, which integrates reverse flows and reverse supply chain activities into the traditional forward supply chain activities. This network design...
A TWO STAGE SOLUTION APPROACH FOR THE SHIFT-BASED SCHEDULING PROBLEM ON WELDING MACHINES
In this study, one of the special version of n product, m unrelated parallel machine scheduling problem is considered. This problem occursin a firm which produces white goods and it is determining that which job produces...
2-OPT ALGORITHM AND EFFECTS OF INITIAL SOLUTION ON RESULTS
In this study the 2-opt heuristic algorithm which was proposed by Croes (1958) for the travelling salesman problem is presented and the effect of the initial solutions produced by constructive heuristics on the performan...
ECZACIBASI HYGIENE PRODUCTS PRODUCTION AND INVENTORY PLANNING SYSTEM DESIGN
In this study, we design a production and inventory planning system which maximizes customer service level and minimizes total production related costs for Eczacibasi Hygiene Products factory. The system will make produc...