Design Concepts of DFIG Based Wind Turbine Control System using Neuro Fuzzy Controller for Industrial Applications
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2018, Vol 8, Issue 2
Abstract
Extracting energy from the wind by wind turbine plays important role in the renewable energy systems. In the modern world, ‘making smart city’ is the key concept to generate alternative power. Industries, Institutions, Household appliances, etc. need continuous electrical power for their needs. It can be fulfilled by renewable energy sources such as wind, solar, etc. Designing of variable wind turbine includes capturing of wind energy, conversion from mechanical rotation into electrical, starting and stopping of turbine system. These are not limited to the above, but also considering aerodynamic blade design, design of complete wind system, design of hub, generator structure and so on. For better performance of wind turbine, a control strategy can be designed so that the performance of the Power electronic components and generator used in wind turbine system can be enhanced. An optimization technique has been stated here along with intelligent control design. In this article, design concepts, performance measurement and storage capacity of wind power systems and Intelligent Controllers have been explained.
Authors and Affiliations
DHANASELVAM J, V. RUKKUMANI
Keywords
Related Articles
- EP ID EP347109
- DOI 10.24247/ijmperdapr201818
- Views 96
- Downloads 0
The Impact of Various Compression Ratio and Influence of Bio Additive With Jatropha Methyl Ester Biodiesel in DI Diesel Engine
The rapid depletion of petroleum fuels and their ever increasing costs have led to an intensive search for alternative fuels. Also, there was a need to reduce the consumption of diesel fuel in the developed and in the de...
Performance Analysis of Compression Ignition (CI) Engine Using Bio Fuels
On a basic level, outflow diminishment of harmful substances in fumes gas of compression-ignition (CI) diesel engine can be accomplished at three spots: previously, in and after the CI engine. The normal approach is the...
Experimental Investigation of Spring Back and Wrinkling Phenomena in Square Pipes during Bending
Bending operation is one of the crucial steps in producing a variety of industrial products. The objective of this work is to design and fabricate a pipe bending die for making square shaped pipes. Design of the die is d...
Advanced Fabricated Setup for Day Long Production of Hot Water by Fresnel Lens
This work has been aimed to collect the solar energy source from Fresnel lens and utilize it to produce hot water or steam. The setup consists of a large spot Fresnel lens which concentrates the sun's rays into a one-cen...
OPTIMIZATION OF PROCESS PARAMETERS DURING TIG WELDING OF Si-Mg-Mn AL ALLOY 64430
The experimental investigation has been carried out to study the influence of welding current, shield gas flow rate and filler rod on ultimate tensile strength, ultimate load, yield load and yield stress of commercially...