The Impact of Various Compression Ratio and Influence of Bio Additive With Jatropha Methyl Ester Biodiesel in DI Diesel Engine
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2018, Vol 8, Issue 1
Abstract
The rapid depletion of petroleum fuels and their ever increasing costs have led to an intensive search for alternative fuels. Also, there was a need to reduce the consumption of diesel fuel in the developed and in the developing countries. The increasing industrialization and innovation of the world lead to a steep rise in the consumption and demand of the petroleum based fuels every year. The experimental work to evaluate the impact of various compression ratio using blends of diesel fuel with 20% concentration of Methyl Ester of Jatropha biodiesel blended with bio additive as an alternate fuel. The experiment was carried out with three different compression ratio in DI diesel engine. Biodiesel was extracted from Jatropha oil, 20% (B20) concentration with 3 ml bio additive is found to be the best blend ratio from the earlier experimental study. The biodiesel B20MEOJBA3 ml is tested with various compression ratio of 17.5, 16.5 and 15.5 respectively. The main objective is to obtain better efficiency, minimum specific fuel consumption and lesser emission using 3ml bio additive blends with biodiesel when compared with baseline diesel
Authors and Affiliations
S. SIVAGANESAN, C. DHANASEKARAN, M. CHANDRASEKARAN, A. PARTHIBAN
Keywords
Related Articles
- EP ID EP281009
- DOI 10.24247/ijmperdfeb2018119
- Views 56
- Downloads 0
Mechanical and Thermal Investigations of Aluminium Al7075 Zirconium Oxide and Graphite Composite Material
In the world, existing materials are not sufficient to overcome the needs and to fulfil those needs, composite materials exist. The properties of composite materials are enhanced to overcome the needs. In this article, A...
Experimental Investigation and Optimiztion of Welding Parameters of Metal Inert Gas Welding Process in Joining Dissimilar Metals
The erection and production industries of modern world use dissimilar metals for different parts that are primarily joined using numerous welding processes. Metal Inert Gas welding has a wider application in the manufact...
Optimization of Process Parameters in Turning Operation of Austenitic Stainless Steel Rod using Taguchi Method and ANOVA
This research paper is an outcome of investigation made on the parameters those affects on austenitic stainless steel work piece roughness in the turning operation as a part of that the parameters involved in the operati...
Experimental Investigation of Heat Transfer Characteristics of the Heat Pipe
The rapid development of electronic industries and increasing processing speed of components, decrease the heat transfer surface area. This generates terribly high heat fluxes, leading to massive temperature rises. To re...
Mathematical and Experimental Analysis of Solar Tunnel Dryer for Drying Beef as a Biological Product
This work analyses the performance of a solar tunnel dryer for drying beef, under forced convection by using a DC blower run by a photovoltaic panel (200w). An experimental setup of solar tunnel dryer has been designed a...